[access-uk] Re: Colour detectors.

  • From: Léonie Watson <tink@xxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Sat, 20 Oct 2007 21:17:29 +0100

Ian,
 
    Thanks, that's useful. I thought the cost of the Cobalt model was steep
enough. I really shouldn't be surprised at the cost of access technologies
anymore, but somehow it never fails to horrify me. Possibly not quite as bad
as a talking tape measure at £49, but not far off!
 
Regards,
Léonie.

  _____  

From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Ian Macrae
Sent: 20 October 2007 21:14
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Colour detectors.


Hi Leone, there are three that I know of.  The cobolt colour tester, the
cheapest, the Colorino and the colortest both from Caretec in Austria.  Of
these the Colorino is the cheaper at around 70 quid and the colortest is
somewhere in the neighbourhood of £350.  I'm awaiting delivery of review
models of the latter two and will report back to the list on how they
perform.  
 
 

----- Original Message ----- 
From: Léonie Watson <mailto:tink@xxxxxxxxxx>  
To: access-uk@xxxxxxxxxxxxx 
Sent: Saturday, October 20, 2007 9:08 PM
Subject: [access-uk] Colour detectors.

Evening,

I'm considering buying a colour detector. There have been
discussions on one of the lists recently, possibly this one, about something
called a Colourino. I also notice that Cobalt have a colour detector.

Apologies if this is covering old ground again, but I'd appreciate
peoples thoughts on this. Thanks.

Regards,
Léonie.

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



Other related posts: