[access-uk] Re: New Scanner For OpenBook
- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 13 Feb 2008 08:33:34 -0000
Hi Graham,
I have found th opposite. If you run the latest drivers, you don't have to
plug the scanner in, until you have installed the drivers, then the scanner
will be picked up.
All the best
Steve
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Graham Page
Sent: Wednesday 13 February 2008 01:44
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: New Scanner For OpenBook
I have found that this scanner can be tricky to install sometimes. This is
usually solved by downloading the latest drivers.
Also, when installing the scanner you need to make sure that you pplug the
scanner in before you start. With other scanners such as those produced by
Epson, you need to plug in the scanner when asked by the software or once
the software is fully installed depending on model.
Cheers
Graham
Graham Page
Home Phone: 0207 265 9493
Mobile: 07753 607980
Fax: 0870 706 2773
Email: gpage@xxxxxxxxxxxxxx
MSN: gabriel_mcbird@xxxxxxxxxxx
Skype: gabriel_mcbird
----- Original Message -----
From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Tuesday, February 12, 2008 10:23 PM
Subject: [access-uk] Re: New Scanner For OpenBook
> Hi Brian,
>
> Yes, it does work with Vista.
>
> All the best
>
> Steve
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
> Of
> brian_dalton
> Sent: Tuesday 12 February 2008 21:43
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: New Scanner For OpenBook
>
> Hi,
>
> does anyone know if this scanner will work with vista?
> or has this been superceeded by a later model?
>
> Brian.
> ----- Original Message -----
> From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Monday, November 05, 2007 9:20 PM
> Subject: [access-uk] Re: New Scanner For OpenBook
>
>
>> Hi Caroline,
>>
>> Two words for you. OpticBook 3600. It is a fantastic scanner. It is
>> expensive, but it has a book edge, which means you can easily scan
>> paperbacks, and it gets right to the spine. And at nine seconds a scan
> pass
>> over a page, it is darned fast too.
>>
>> All the best
>>
>> Steve
>>
>> -----Original Message-----
>> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
> Of
>> Caroline Ford
>> Sent: 05 November 2007 21:05
>> To: Access-Uk@Freelists. Org
>> Subject: [access-uk] New Scanner For OpenBook
>>
>> Hello,
>>
>> I have been using an Epson Perfection 1660 with OpenBook 7 for several
>> years. The scanner now needs to be replaced, and I would be interested
>> to
>> know whether anyone has bought a scanner recently for use with OpenBook
>> or
>> any other OCR package and whether it has been a success or not.
>>
>> I have had a look at the Freedom Scientific page of supported scanners,
> but
>> there must be about a hundred models listed and it is difficult to know
>> which one to choose, although I imagine many of them are no longer
>> available. So if anyone has any recommendations to pass along, that
>> would
>> be a great help.
>>
>> Thanks,
>>
>> Caroline.
>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
> __________ NOD32 2870 (20080212) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: