[access-uk] Re: POWERING DEVICES

  • From: "Tristram Llewellyn" <tris-l@xxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Wed, 10 Jan 2007 16:27:23 -0000

George suggestion of getting a make and model will be the best way to ascertain 
the details through some research, probably easily done on the net.  However if 
the equipment is old or stightly unusual then you may need the guidance below.
It would be important here to get some eyes on the equipment itself.  I am 
assuming this is a peice of kit that had a wall wart type adaptor.  If so you 
should see if a DC or AC input voltage is mentioned either near the input 
socket or on a plate elsewhere on said kit this should tell you what type of 
voltage, how much and possible maximum current draw.  It is vitally inportant 
you ascertain whether the input is AC or DC here, if you plug a DC current into 
an input that accepts AC then you are likely to cause internal damage.  Voltage 
is also important, too much will potentially cause damage to some equpment.

If the unit is DC powered then there are usually plenty of multi-voltage power 
adaptors that come with a number of DC jack plugs to accomodate your kit.  My 
guess is that if it takes batteries your input is going to be of a fairly 
standard DC type ranging from 4.5 to possibly 12 volt.  You could take said 
device along with you to somewhere like Maplin, they may very well be able to 
help you there.

Regards.

Tristram Llewellyn
Sight and Sound Technology
Technical Support
www.sightandsound.co.uk

  ----- Original Message ----- 
  From: Ian Macrae 
  To: access-uk@xxxxxxxxxxxxx 
  Sent: Wednesday, January 10, 2007 3:48 PM
  Subject: [access-uk] POWERING DEVICES


  Hello all,
  Over Christmas the mains power unit to one of my pieces of kit broke
  when the earth pin snapped off.  Sadly, the broken unit has been chucked
  and I didn't have an opportunity to record its particulars.  Is it
  possible to deduce from the battery power required what I should be
  looking for in terms of voltage output etc?  And what might be the other
  things I need to ensure are compatible?

  With thanks.

  Ian

  http://www.bbc.co.uk/
  This e-mail (and any attachments) is confidential and may contain personal 
views which are not the views of the BBC unless specifically stated.
  If you have received it in error, please delete it from your system.
  Do not use, copy or disclose the information in any way nor act in reliance 
on it and notify the sender immediately.
  Please note that the BBC monitors e-mails sent or received.
  Further communication will signify your consent to this.


  ** To leave the list, click on the immediately-following link:-
  ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
  ** If this link doesn't work then send a message to:
  ** access-uk-request@xxxxxxxxxxxxx
  ** and in the Subject line type
  ** unsubscribe
  ** For other list commands such as vacation mode, click on the
  ** immediately-following link:-
  ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
  ** or send a message, to
  ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: