[access-uk] Re: Plextalk Linio
- From: David Griffith <daj.griffith@xxxxxxxxx>
- To: access-uk@xxxxxxxxxxxxx
- Date: Wed, 14 Jan 2015 10:53:39 +0000
Please be aware as you have downloaded these that these Podcasts are not in
relation to the Linio but the first generation Pocket Plextalk which Freedom
Scientific used to sell.
There are lots of similarities between the first ten Plextalk Pocket and the
Linio but significant differences as well.
For example the way the Linio manages memory is completely different as the
Linio has an 8GB internal memory drive which the Pocket Plextalk does not. The
recording procedures are different from the way described in the 2011 Podcasts
on both generations of Plextalk now.
Of course none of the the Alarm or Calendar / Diary functions will be covered
in these Podcasts either.
The Linio also now supports many File Formats which were not available in 2011.
However there is enough overlap for the Podcasts to still be helpful I think as
long as you are aware that things are not necessarily going to be exactly the
same..
David Griffith
> On 14 Jan 2015, at 10:40, jibberjabber2014@xxxxxxxxxxxx wrote:
>
> Hi Chris,
> Thanks much for the info. I found both podcasts from way back in mid 2011,
> and have them ready for listening.
>
> Regards.
> JJ.
>
> -----Original Message----- From: chris miles
> Sent: Tuesday, January 13, 2015 11:32 PM
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: Plextalk Linio
>
> On 13/01/2015 18:24, jibberjabber2014@xxxxxxxxxxxx wrote:
>> Hi,
>> Does anyone know if there are any podcast available demonstrating the
>> Plextalk Linio?
>>
>> Regards.
>> JJ.
>>
>> ---
>> This email is free from viruses and malware because avast! Antivirus
>> protection is active.
>> http://www.avast.com
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
> Hi,
>
> Yes, Jonathan Mosen on FS Cast did two podcasts some while ago on the
> player you mention.
>
> Hope this is of help.
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ---
> This email is free from viruses and malware because avast! Antivirus
> protection is active.
> http://www.avast.com
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: