Cheers man I'll give it a whirl -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of James O'Dell Sent: 24 August 2005 20:44 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: Problems adding feeds to Accessible RSS Reader There's a fairly simple but powerful reader at www.feedreader.com. Open-source, lightweight and doesn't need any additional components. James ----- Original Message ----- From: "Sunil" <bosley20@xxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Wednesday, August 24, 2005 8:35 PM Subject: [access-uk] Re: Problems adding feeds to Accessible RSS Reader > Cheers for that. This thing about feeds not working is a huge > disappointment, especially after I ditched the readers which needed > net framework. I'd be interested to know why the feed from the > Independent newspaper is 'faulty' according to the accessible > feedreader...cheers > > -----Original Message----- > From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On > Behalf Of > Douglas Harrison > Sent: 24 August 2005 19:42 > To: access-uk@xxxxxxxxxxxxx > Subject: [access-uk] Re: Problems adding feeds to Accessible RSS > Reader > > > Sunil, > I have experienced a similar problem with other feeds and that was one > reason why I was looking for an alternative - until the Net Framework > 1.1 issue arose. > > I have just looked at > > http://www.webbie.org.uk/accessiblerss/index.htm > > and read the following - > "You are likely to find that some feeds don't work. This may be > because the > feed is not > valid. You can check the feeds validity at The Feed Validator Service > (link)." I don't know quite how to interpret that. > > I suggest that you report any feeds that don't work with Accessible > RSS but > do work on > other aggregators. Feedback is welcomed but I have to admit that > reports of > bugs and > suggestions for improvement seem to wait some time before they are > taken into account. > > > Douglas > > > > > On 24 Aug 2005 at 18:16, Sunil wrote: > > > I've installed 1.7 of the software and have added several feeds. I > > just tried to add the feed for the Independent's Media stories and > > got a message saying something along the lines of the feed couldn't > > be added because it was bad or faulty. I know its not though because > > I added it to a different > > aggregator last night, same thing happened when I tried to add a feed > > from > > the New Statesman too. Can any Accessible RSS users explain what the > > problem > > might be? > > > > > > -- > > Douglas Harrison > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq