[access-uk] Re: Problems with Kurzweil 11

  • From: Aman Singer <aman.singer@xxxxxxxxx>
  • To: access-uk@xxxxxxxxxxxxx
  • Date: Fri, 27 Nov 2015 08:17:36 -0500

Hi John,

You might want, in Kurzweil, to go to settings, then scanning (alt+t,
then s on my version here). Then tab around to "scanner source" and
select a different scanner source. Then OK out of the box and try
scanning. It may be worth, also, having a try with IrfanView or one of
the other light-weight scanning packages to make sure that the scanner
is still working in general.
HTH,
Aman

On 11/27/15, John Wilson <j.wilson07@xxxxxxxxxxxxx> wrote:

I seem to have a faint recollection of having to change the scanning
interface which was being used from Twain to a WAI interface but can not
find anything in the Kurzweil menus where this can now be done, nor in the
Lexmark options.

I have already spent many hours trying to get things working OK again but to
no avail.

Has anyone any ideas what might be the problem and how it might be fixed.

Thanks.
John.
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts:

  1. Home
  2. access-uk
  3. Archive
  4. 11-2015