[access-uk] R: Re: R: Editing in Total Recorder using JAWS
- From: "RMPortal" <robertmartin.portal@xxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 13 Jan 2013 22:52:50 +0100
Ed,
When you land in the programme control tab about twice and this will take
you to a control where you can use the up and down arrow keys to adjust the
distance you want to jump in a recording (a maximum of 15 minutes and
minimum of 0.1 seconds). Control t will then jump you forward by the amount
you have selected and control l will jump you back.
By the way, if you press shift r without having pressed shift l earlier in
the recording it will automatically select from the start and if you press
shift l without then pressing shift r after that point it will automatically
select to the end. If you then press the delete key the selected part of the
recording will be deleted. This is quite useful if you just want to trim a
piece off the end or the beginning of a recording.
If you make a mistake control z will undo your last action.
Best wishes
Robert
-----Messaggio originale-----
Da: access-uk-bounce@xxxxxxxxxxxxx [mailto:access-uk-bounce@xxxxxxxxxxxxx]
Per conto di Edward Green
Inviato: domenica 13 gennaio 2013 15.42
A: access-uk@xxxxxxxxxxxxx
Oggetto: [access-uk] Re: R: Editing in Total Recorder using JAWS
Hi Robert,
Many thanks. Once I've started a selection with shift L, how do I then move
through the recording in order to find the end point? Do I need to play the
recording in order to do this or is it possible to navigate the recording
more quickly?
Thanks again,
Ed
-----Original Message-----
From: access-uk-bounce@xxxxxxxxxxxxx [mailto:access-uk-bounce@xxxxxxxxxxxxx]
On Behalf Of RMPortal
Sent: 13 January 2013 11:50
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] R: Editing in Total Recorder using JAWS
Dear Edward,
Total Recorder is one of those programmes I have intended for ages to go
through in detail to learn how to use its functionality to the full but have
never got round to it.
For simple editing though it could hardly be easier: Shift l starts a
selection and shift r ends it and once the selection is made you can delete
it, save it, play it etc. You need to look at the menus to check how. I have
also found the help topics to be reasonably accessible and helpful.
Best wishes
Robert
-----Messaggio originale-----
Da: access-uk-bounce@xxxxxxxxxxxxx [mailto:access-uk-bounce@xxxxxxxxxxxxx]
Per conto di Edward Green
Inviato: domenica 13 gennaio 2013 1.12
A: access-uk@xxxxxxxxxxxxx
Oggetto: [access-uk] Editing in Total Recorder using JAWS
Hi all,
I have just started to use Total Recorder 8.4. Please could someone give me
some basic tips or point me to some information/a tutorial on how to edit
using the keyboard? Is it possible to select increments of a recording and
hear what it is you are selecting, so that you can delete, insert, move
things etc?
I haven't done any sound editing before so don't know if there are basic
concepts common across most packages that I'm not aware of.
Many thanks,
Ed
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
- » [access-uk] R: Re: R: Editing in Total Recorder using JAWS - RMPortal