[access-uk] Re: TVonics connection question
- From: "Steve Hyde-Dryden" <csdryden@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Thu, 10 May 2012 18:25:50 +0100
Andy, if the sound is taken from the optical out on the TVonics, it will not
play through an anologue amp unless as you say, it is converted through a
Digital Analogue Converter. These are available as separate units such as
the Arcam DAC for around £300 but also, some CD players and Mini-Disks will
have an optical in where you could use them to monitor the audio. Some of
the upper end CD players provide access to external sources to their DAC
converters. If though you have a Digital Amp which has dedicated digital
inputs then this will provide the amplification you need without going
through an external DAC. Cyrus for example do some digital amps which are
not AV but have optical inputs for the likes of a CD player, DAT machine or
Minidisk player.
Hope that helps and sorry if you already knew this.
Steve
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
ANDY COLLINS
Sent: 10 May 2012 17:10
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: TVonics connection question
Hi John - Does this mean that all digital output has to be converted to
analog in order to be amped through a sound system? I had imagined the sound
going from the optical out in to a digital amp, so no need for conversion? -
Andy
----- Original Message -----
From: "john coley" <johncoley@xxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, May 10, 2012 2:47 PM
Subject: [access-uk] Re: TVonics connection question
> Hi Andy, the only way you could do that is to route through an digital to
> analog converter, and from the DAC into the amp.
> John.
>
> ----- Original Message -----
> From: "ANDY COLLINS" <Andy@xxxxxxxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Thursday, May 10, 2012 2:07 PM
> Subject: [access-uk] Re: TVonics connection question
>
>
>>- So this is where you'd probably want to use the optical out that people
>>have been talking about -
>>
>> Andy
>> ----- Original Message -----
>> From: "Yusuf" <yusufaosman@xxxxxxxxxxxxxx>
>> To: <access-uk@xxxxxxxxxxxxx>
>> Sent: Thursday, May 10, 2012 1:23 PM
>> Subject: [access-uk] Re: TVonics connection question
>>
>>
>>>I don't. I'll be quite happy to disconnect it. But I'd like the new box
>>>to be connected to the amp in the same way that the Goodmans is at the
>>>moment.
>>> Yusuf
>>>
>>> On 10/05/2012 13:17, Kulvinder Singh Bhogal wrote:
>>>> Just a quick question, since you have the new box, why would yu want to
>>>> keep the goodmans connected?
>>>>
>>>> Just wondering, that's all.
>>>>
>>>> Regards.
>>>>
>>>> Kulvinder Singh Bhogal
>>>> Skype: bobba2006
>>>> Messenger: Kulvinder@xxxxxxxx
>>>> Tel: 01332 514323
>>>> Mobile: 07581483856
>>>> ----- Original Message ----- From: "Yusuf" <yusufaosman@xxxxxxxxxxxxxx>
>>>> To: <access-uk@xxxxxxxxxxxxx>
>>>> Sent: Thursday, May 10, 2012 1:14 PM
>>>> Subject: [access-uk] TVonics connection question
>>>>
>>>>
>>>>> Hi, Like so many others I've just taken my delivery of this product.
>>>>> My current set-up, using the Goodmans, is that I've got a Scart to
>>>>> fono adaptor. This connects the Freeview box directly into the back of
>>>>> my amp, thus allowing me to have the Freeview sounds coming out of my
>>>>> amp's speakers and avoid turning on the TV. The current box is also
>>>>> connected to the TV using a scart cable and the external arial also
>>>>> goes into the box.
>>>>>
>>>>> I've looked at the back of the TVonics and have found the Scart
>>>>> connector. If I use this to connect to the back of my TV, what would I
>>>>> need to also connect the TVonics to my amp.
>>>>>
>>>>> At some point I'm probably going to want to connect my DVD player up
>>>>> to all this as well. Can anyone offer any advice on how this might be
>>>>> done?
>>>>>
>>>>> I've not yet looked at the manual but obviously am planning to. Any
>>>>> help in the meantime would be much appreciated.
>>>>> Yusuf
>>>>> ** To leave the list, click on the immediately-following link:-
>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>> ** If this link doesn't work then send a message to:
>>>>> ** access-uk-request@xxxxxxxxxxxxx
>>>>> ** and in the Subject line type
>>>>> ** unsubscribe
>>>>> ** For other list commands such as vacation mode, click on the
>>>>> ** immediately-following link:-
>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>>> ** or send a message, to
>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>>
>>>>
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** access-uk-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>> ** or send a message, to
>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>
>>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: