[access-uk] Re: easy way to connect Echo

  • From: "Jackie Brown" <jackieannbrown62@xxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Fri, 2 Dec 2016 08:31:15 -0000

Hi Tony

If you have WiFi, then essentially yes.  When you set up your Dot, what you
need to do is turn it on, wait a minute or two, then go to WiFi settings,
and click on the Amazon icon it brings up.  Then you go back to the setup
screen on the app, or in your case, the website, and type in your WiFi
password when prompted.  As I have said before, I used the app specifically
for that, then used the website thereafter.  I have heard it can be done
solely from the website, and as long as you know where to go on your PC to
find the Amazon Echo icon in the settings, it should work.  If you are
unsure though, contact Amazon Customer Services unless anyone else can
verify this.

Kind Regards,

Jackie Brown
Emails: thebrownsplace@xxxxxxxxxxxxxx
jackieannbrown62@xxxxxxxxx
jackie@xxxxxxxxxxxxxxxxxxx
Check out my website: www.thebrownsplace.info
Read my EyeWrite blog: www.thebrownsplace.info/?page_id=136
Follow me on Twitter: @thebrownsplace
Skype: thejackmate


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Tony Sweeney
Sent: 01 December 2016 17:31
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: easy way to connect Echo

Hi Jackie,

I don't have a smart phone and would very much like to get the Dot so can
one do this all through the website?

Best,

Tony Sweeney.
On 01/12/2016 17:17, Jackie Brown wrote:

Hi Mike

Personally I would do it via the app, then ditch it and use the website.

Kind Regards,

Jackie Brown
Emails: thebrownsplace@xxxxxxxxxxxxxx
jackieannbrown62@xxxxxxxxx
jackie@xxxxxxxxxxxxxxxxxxx
Check out my website: www.thebrownsplace.info Read my EyeWrite blog: 
www.thebrownsplace.info/?page_id=136
Follow me on Twitter: @thebrownsplace
Skype: thejackmate


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On ;
Behalf Of Mike
Sent: 01 December 2016 16:22
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] easy way to connect Echo

Hello Everyone

I believe there is more than one way to connect an Amazon Echo.  What 
is the simplest way of achieving this.?

With thanks

Mike..

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: