Driving myself mad with this so any suggestions appreciated. Background is daughter is getting a laptop for chrismas so I need to move the wireless router to get coverage all over the house. Problem is, I have an office/playroom underneath the house so it is not easy for me to get network cables down here. There are 3 computers in the office running xp and various flavours of linux. The kit is draytek ap-800 for the repeater/access point and I have a couple of routers (draytek 2600we and bt business hub 2wire 2700hgv. I am having problems getting communication between the devices. What I would like to do is connect the computers in the office to the ap-800 with network cables (the ap-800 has a built in 4 port switch). Then get a signal wirelessly from the router upstairs to the ap-800. What I am not sure about is the dhcp i.e. should the computers get an ip address from the router, the ap-800 or have fixed ip addresses? The ap-800 has a dhcp server built in to it which can be enabelled or disabelled and same goes for the router. The ap-800 manual leaves a bit to be desired. I am sure it is an ip issue as I have turned off all security for my tests. Ideas? Thanks Keith Barrett ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq