Hi John, One last try perhaps before Monday's call. See below, but use the 192.168.2.1 address, since somehow that appears to have set itself. George. 9. I forgot my password, or the password prompt always appears when I am saving settings to the Router. Reset the Router to factory default by pressing the Reset button for 10 seconds and then releasing it. If you are still getting prompted for a password when saving settings, then perform the following steps: 1. Access the Router's web-based utility by going to http://192.168.1.1 or the IP address of the Router. Enter the default password admin, and click the Administration => Management tab. 2. Enter a different password in the Router Password field, and enter the same password in the second field to confirm the password. 3. Click the Save Settings button. -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of John R. & guide dog Iris Sent: Sunday, March 09, 2008 3:41 PM To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: ruter security problems hi John R. here this is my problem, that address just throws an error 404 page can not be found error. but the other one, http://192.168.2.1 this gives me an user name and password window but I've tried what the manual says and it doesn't work maybe it's time to take this further with linksys thanks from John and guide dog Iris ----- Original Message ----- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Sunday, March 09, 2008 3:36 PM Subject: [access-uk] Re: ruter security problems Hi John, Leave the Username blank. The password is admin Here's the relevant page. George. A. Open your web browser. Enter http://192.168.1.1 in its Address field. Press the Enter key. B. A password request screen will appear. Leave the User name field blank, and enter the default password, admin, in the Password field. (For added security, you should later set a new password, using the Administration tab's Management screen of the Web-based Utility). Then click the OK button. C. The Web-based Utility will appear with the Setup tab selected. If requested by your Internet Service Provider (ISP), complete the Host Name and Domain Name fields. (These are usually requested by cable ISPs.) Otherwise, leave them blank. -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of John R. & guide dog Iris Sent: Sunday, March 09, 2008 3:27 PM To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: ruter security problems Hi George John R. here I've saved you a job I've found the acrobat file from the cd and uploaded to sendspace it's 5mb big you'll find it at: http://www.sendspace.com/file/phijsk please help me get around this if I don't get anywhere this time I'll be calling a techniction in from I'va Linksys or from the store I bort it thanks from John and guide dog iris ----- Original Message ----- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Sunday, March 09, 2008 10:57 AM Subject: [access-uk] Re: ruter security problems Hi John, What is the exact make and model of your router? Perhaps I can track down an on-line manual. (Sorry if you've given it before, but the thread's getting a bit long.) It appears that IP address 192.168.2.1 is correct, and the Username and Password should in theory be whatever the manual says in the default. Have you tried Username admin and left the Password blank? That's how my two Draytek Vigor 2600s were accessed. But if we can track down a manual, it should be possible to confirm or otherwise. George. -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of John R. & guide dog Iris Sent: 09 March 2008 09:49 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: ruter security problems hi everyone thanks to those who are being pacient with me. still I can't get around this. no matter what I do no matter where I go in the run box or internet explorer open or internet explorer address bar, I get no where with: http://192.168.1.1 I get the password and user name window come up when I use the following: http://192.168.2.1 and I'm only using 1 ruter so I dont know what's going on. with the, 1.1, I get a delay then a message saying, the page could not be found. but with the 2.1, number, it asks me for a user name and password I've done what the manual says that don't work, I've tried typing admin in each box, I've tried using my internet ISP details but still nothing. I've even done a hard reset from the ruter hole point. but with that there is a delay then it goes back on to the internet does anyone see a way out of this maze? from John and guide dog Iris ----- Original Message ----- From: "Marie Baisez" <baisez.marie@xxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Sunday, March 09, 2008 8:41 AM Subject: [access-uk] Re: ruter security problems > For what it's worth, the default username and password on routers is > usually adnin, type these on the 2 edit fields when prompted and see what > happens. > Hope this helps. > Marie > ----- Original Message ----- > From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx> > To: <access-uk@xxxxxxxxxxxxx> > Sent: Saturday, March 08, 2008 8:31 PM > Subject: [access-uk] Re: ruter security problems > > >> John - I don't know that you'd be able to actually download that wizard, >> but >> there will probably be a FAQ or trouble shoot on the website; I'm a bit >> muddled regarding your router's installation, I thought it was already >> installed, but from your below message it now sounds like your stuck part >> way through the installation? - >> >> Andy >> ----- Original Message ----- >> From: "John R. & guide dog Iris" <johnathanrichards@xxxxxxxxxxxxxxxx> >> To: <access-uk@xxxxxxxxxxxxx> >> Sent: Saturday, March 08, 2008 6:34 PM >> Subject: [access-uk] Re: ruter security problems >> >> >> | Hi Andy >> | no I've got nothing on my desktop or my start menue's or programs >> menue's >> | but when I go in to the control pannel and go to add and remove >> programs >> | there the programs say, Braudcam or something like that. but still >> apart >> | from there I can't find or access it. >> | the problem is on the cd that came with the ruter there is a set up >> wizzard >> | but when it gets about half way through and then it asks for the admin >> | password I enter the right one and leave the user name blank but still >> | nothing happends it just hangs there I've had someone sighted have a >> look >> | and it just greys out and nothing happends and when you go to task >> manager >> | it says the program isn't responding but I've done this way over 10 >> times >> | and every single time it does the same thing >> | >> | I'm wondering am I able to download that setup wizzard from the linksys >> | website? >> | >> | from John and guide dog Iris >> | ----- Original Message ----- >> | From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx> >> | To: <access-uk@xxxxxxxxxxxxx> >> | Sent: Saturday, March 08, 2008 6:12 PM >> | Subject: [access-uk] Re: ruter security problems >> | >> | >> | > Hi John - >> | > >> | > Have you got an icon on your desk top for your router? If so, click >> on >> | > that, >> | > and you should be able to access from there, using your log in >> details. >> | > >> | > HTH - >> | > >> | > Andy >> | > ----- Original Message ----- >> | > From: "John R. & guide dog Iris" <johnathanrichards@xxxxxxxxxxxxxxxx> >> | > To: <access-uk@xxxxxxxxxxxxx> >> | > Sent: Saturday, March 08, 2008 5:08 PM >> | > Subject: [access-uk] ruter security problems >> | > >> | > >> | > | HI everyone I know this isn't very appropiate for this list but if >> | > someone >> | > | could help on or off list will help. >> | > | I've got a linksees ruter. I'm hard wired to the ruter but it also >> has >> | > | wireless capabilities enabled. I know this because my dads laptop >> on >> | > | wireless can connect to it as well. >> | > | now the problem i'm facing is in the linksees electronic manual it >> gives >> | > me >> | > | the IP address, password, and user name to log in to the ruter. and >> | > telles >> | > | me what should be coming up. >> | > | now it says type that address in to the internet browser, I've done >> that >> | > it >> | > | says press enter and you'll get a logo logon screan asking for my >> | > password >> | > | and user default names. but when I press enter on that address I >> get a >> | > 404 >> | > | error, page can not be found. but yet I'm using it now through the >> | > ruter >> | > so >> | > | my question is: >> | > | how can I configger the ruter when I can't get to the settings? >> | > | >> | > | please can someone help me please? >> | > | >> | > | I'm going to be posting this on multiple lists for help please if >> you >> | > see >> | > it >> | > | more then once can you help where you can but also you can E-mail >> me >> off >> | > | list as well on the following address: >> | > | johnathanrichards@xxxxxxxxxxxxxxxx >> | > | >> | > | thanks for anyone's help >> | > | >> | > | from John and guide dog Iris >> | > | >> | > | >> | > | ** To leave the list, click on the immediately-following link:- >> | > | ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >> | > | ** If this link doesn't work then send a message to: >> | > | ** access-uk-request@xxxxxxxxxxxxx >> | > | ** and in the Subject line type >> | > | ** unsubscribe >> | > | ** For other list commands such as vacation mode, click on the >> | > | ** immediately-following link:- >> | > | ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >> | > | ** or send a message, to >> | > | ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >> | > | >> | > | >> | > | -- >> | > | This email has been verified as Virus free. >> | > | Virus Protection and more available at http://www.plus.net >> | > >> | > ** To leave the list, click on the immediately-following link:- >> | > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >> | > ** If this link doesn't work then send a message to: >> | > ** access-uk-request@xxxxxxxxxxxxx >> | > ** and in the Subject line type >> | > ** unsubscribe >> | > ** For other list commands such as vacation mode, click on the >> | > ** immediately-following link:- >> | > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >> | > ** or send a message, to >> | > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >> | > >> | > >> | > >> | > >> | > -- >> | > this message is clean >> | > Checked by AVG. >> | > Version: 7.5.518 / Virus Database: 269.21.6/1318 - Release Date: >> | > 07/03/2008 14:01 >> | > >> | > >> | >> | >> | ** To leave the list, click on the immediately-following link:- >> | ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >> | ** If this link doesn't work then send a message to: >> | ** access-uk-request@xxxxxxxxxxxxx >> | ** and in the Subject line type >> | ** unsubscribe >> | ** For other list commands such as vacation mode, click on the >> | ** immediately-following link:- >> | ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >> | ** or send a message, to >> | ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >> | >> | >> | -- >> | This email has been verified as Virus free. >> | Virus Protection and more available at http://www.plus.net >> >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** access-uk-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >> >> >> >> __________ NOD32 2932 (20080309) Information __________ >> >> This message was checked by NOD32 antivirus system. >> http://www.eset.com >> >> > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > > > > -- > this message is clean > Checked by AVG. Version: 7.5.518 / Virus Database: 269.21.7/1319 - Release > Date: 08/03/2008 10:14 > > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq -- this message is clean Checked by AVG. Version: 7.5.518 / Virus Database: 269.21.7/1319 - Release Date: 08/03/2008 10:14 ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq -- this message is clean Checked by AVG. Version: 7.5.518 / Virus Database: 269.21.7/1319 - Release Date: 08/03/2008 10:14 ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq