If you really need 19mm or smaller it looks like the Honeywell 060-2444-06
might work, it is a bit more expensive than your original one.
To get 6 of them:
http://www.digikey.com/product-detail/en/honeywell-sensing-and-productivity-solutions-t-m/060-2444-06/480-6092-ND/5055805
http://www.newark.com/honeywell/060-2444-06/load-cell/dp/27M3395
If you can deal with a 31.75mm OD you could get the meas-spec FC2311 which
is only $120
http://www.mouser.com/ProductDetail/Measurement-Specialties/FC2311-0000-0250-L/?qs=sGAEpiMZZMvDU9HV27FC0fgNXcIVcGB0OH7yChRPdZQ%3d
There are more options than just these two as well, if you need something
fast going with a major distributor like digikey, mouser, etc. will get you
them in a hurry.
On Tue, Jul 19, 2016 at 7:20 AM, Mark Harris <markh@xxxxxxxxxxx> wrote:
Hi All,
I need 6x 100kg button load cell that's 19mm or 3/4" diameter or smaller
for a non-rocketry project... but I need them really fast. Our project
deadline got moved up by about 2 months and our current supplier (Omega)
have a 5 week leadtime.
I'd prefer a supplier in the USA or Canada purely for shipping time, our
current cells cost CA$600 so anything around that price would be
acceptable. Cheaper is of course welcome.
Does anyone have any recommendations?
- Mark