Hey Uwe, I bought a UV light 3-d printer was going to see if I can add
micro-spheres to print cryogenic insulated 3-d structures, light weight
structural insulation that can be 3-d printed. Open Cell Glass Sphere Foam,
open cell like AeroGel that "The Rocket Whisperer" and Mike Patey low
resin approach. I was thinking about trying to arrange the light sources to
only impact at micro-sphere contact points only. Minimize resin to
structural material ratio.
Are you into FPGAs?
Mike Patey does a good job explaining one offs construction techniques with
carbon. well worth watching.
Some great videos on his Carbon Cub Scrappy.
https://www.youtube.com/watch?v=pBGY57ILDlQ
On Mon, Dec 16, 2019 at 1:10 AM Uwe Klein <uwe@xxxxxxxxxxxxxxxxxxx> wrote:
Am 16.12.2019 um 04:31 schrieb Charlie Garcia:
Speaking as a good friend of Joe's,
Nothing Joe does should be construed as rated for spaceflight.
Also speaking as a good friend of Joe's:
If you're reading this Joe, dear god don't use hydrogen, I like you in
you unexploded state...
.. isn't that just envy about him spreading his genes ? :-)))))
Uwe
On Sun, Dec 15, 2019 at 8:50 PM Craig Fink <webegood@xxxxxxxxx
<mailto:webegood@xxxxxxxxx>> wrote:
https://youtu.be/AkXZcNObUIc?t=47
Uwe, BPS.space 3D printed with heat shielding for the hot section.
One ping only! the trail ( https://youtu.be/AkXZcNObUIc?t=47 ;) is not
mine.
BPS.space use Hydrogen not Propane, your rig looks supersonic ready.
Hydrogen can erase the SoundBarrier to get your Engine Supersonic
for testing.
ping ping ... did you see this video?
https://www.youtube.com/watch?v=AkXZcNObUIc
??
On Wed, Dec 11, 2019 at 1:01 AM Uwe Klein <uwe@xxxxxxxxxxxxxxxxxxx
<mailto:uwe@xxxxxxxxxxxxxxxxxxx>> wrote:
ping
Attachments area
Preview YouTube video TVC Vane Alignment
TVC Vane Alignment
<https://www.youtube.com/watch?v=AkXZcNObUIc&authuser=0>
--
Craig Fink
WeBeGood@xxxxxxxxx