[gps-talkusers] Re: e: Re: paring
- From: meearls@xxxxxxx <meearls@xxxxxxx>
- To: gps-talkusers@xxxxxxxxxxxxx
- Date: Sun, 01 Jun 2008 19:12:09 -0700
Well of course you'd want the maps in your card slot. What map you use depends
upon whether you are at home, or away. You need to go in to the options folder,
and arrow around to the map and poi folder. The thing here is if it is on the
compact flash or pc card the Braille Note needs to know this, and then once you
get that you tell it which folder the map is in and press enter.
Now once you have that done, type read with S, type the address where you are,
following the prompts and you're ready to go. You want to make sure the Braille
Note is pointed to the folder in which you have your maps and it work the same
way going to any folder in the Braille Note works.
The User's manual tells you in more detail how to do this. I am not where my
Mpower is right now, so can't be more specific.
Hope this helps.
Mary Ellen Earls
----- Original Message -----
From: Harwood Dean <dvharwood@xxxxxxxxx>
To: gps-talkusers@xxxxxxxxxxxxx
Date: 2008/06/02 01:39:26
Subject: [gps-talkusers] e: Re: paring
>
>
> mary ellen
> now do you need to have the maps in the braille note if so then
> let me know what map I need to use for this connection.
> Thanks from dean
>
> > ----- Original Message -----
> >From: "Mary Ellen Earls" <meearls@xxxxxxx
> >To: <gps-talkusers@xxxxxxxxxxxxx
> >Date sent: Sun, 1 Jun 2008 13:11:27 com0700
> >Subject: [gps-talkusers] Re: paring
>
> >Ok start at the start menu which is main menu when you turn the
> machine on.
> >Before we get into the bluetooth, go intothe utilities menu and
> press enter.
> > type m for miscelaneous list and press enter.
> >You will be asked Active Sync connection and press B. for
> Bluetooth.
> >Exit out of this menu by pressing the main menu key.
> >Turn on your receiver.
> >NowPress alt o.
> >That gets you into the options menu.
> >Now press can. that brings up the connectivity menu.
> >Now press b for bluetooth.
> > Your Braille Note should ask "Bluetooth On?" and if it says No,
> press y for yes.
> >Press enter and it will ask "Search for devices?" Press y for yes
> and it will tell you it is searching for devices and begin
> beeping.
> >When it stops it should say List of bluetooth devices.
> >Arrow down and it should say whatever the name of your receiver
> is.
> >Now, Press enter on the name of your bluetooth receiver and it
> will say List of services for xxx meaning whatever your receiver
> is.
> >Down arrow to active sync and press enter on this setting. You
> will be asked Pair with whatever your receiver is and activate
> active sync? Press y for yes. Now. it will ask you for an
> authentication code. type 0000 and press enter. You should hear
> the message Paired with whatever your receiver is active sync
> active.
> >Now, Go into the gps program.
> >Press n for this. press o and go. Here is your receiver types
> list. Press b for bluetooth. Now it will say select the
> bluetooth receiver and if it is paired properly, it will come
> right up.
> >Hope this helps. Mary Ellen Earls
> > ----- Original Message -----
> > From: Robert
> > To: gps-talkusers@xxxxxxxxxxxxx
> > Sent: Sunday, June 01, 2008 12:08 PM
> > Subject: [gps-talkusers] paring
>
>
> > Another question, how do I pair my receiver with the QT?
Other related posts: