Hi Sir,
thanks for giving me the link for downloading the driver;
as informed, i requested my chennai linux friend to help, we worked the who=
le day; the results of our work mis as follows: kindly guide me further
i have tried all the commands the you have suggested. but i keep getting er=
ror tht no dialtone is present. PS: I don't have alsa configured in my syst=
em.
i tried the ICW but it generates an error 2 on activating it. i also tried =
with kppp which have detected the modem and the ports created by the progra=
m. it also generates an 'NOT CONNECTED' message.
i am attaching all the o/p of all the commands tht i have tried.
-----------------------------output of ./slmodem -alsa -c INDIA hw:1-------=
---------
symbolic link `/dev/ttySL0' -> `/dev/pts/2' created.
modem `hw:1' created. TTY is `/dev/pts/2'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
-------------------------------------output of `wvdialconf /etc/wvdial.conf=
`----
Scanning your serial ports for a modem.
Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6 S7=20=20=20
Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14 S15=20=20
Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22 S23=20=20
Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30 S31=20=20
Port Scan<*1>: S32 S33 S34 S35 S36 S37 S38 S39=20=20
Port Scan<*1>: S40 S41 S42 S43 S44 S45 S46 S47=20=20
Port Scan<*1>: S48 S49 S50 S51 S52 S53 S54 S55=20=20
Port Scan<*1>: S56 S57 S58 S59 S60 S61 S62 S63=20=20
Port Scan<*1>: S64 S65 S66 S67 S68 S69 S70 S71=20=20
Port Scan<*1>: S72 S73 S74 S75=20=20
ttySL0<*1>: ATQ0 V1 E1 -- OK
ttySL0<*1>: ATQ0 V1 E1 Z -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=3D0 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=3D0 &C1 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=3D0 &C1 &D2 -- OK
ttySL0<*1>: ATQ0 V1 E1 S0=3D0 &C1 &D2 +FCLASS=3D0 -- OK
ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem
ttySL0<*1>: Speed 4800: AT -- OK
ttySL0<*1>: Speed 9600: AT -- OK
ttySL0<*1>: Speed 19200: AT -- OK
ttySL0<*1>: Speed 38400: AT -- OK
ttySL0<*1>: Speed 57600: AT -- OK
ttySL0<*1>: Speed 115200: AT -- OK
ttySL0<*1>: Speed 230400: AT -- OK
ttySL0<*1>: Speed 460800: AT -- OK
ttySL0<*1>: Max speed is 460800; that should be safe.
ttySL0<*1>: ATQ0 V1 E1 S0=3D0 &C1 &D2 +FCLASS=3D0 -- OK
Found a modem on /dev/ttySL0.
Modem configuration written to /etc/wvdial.conf.
ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=3D0 &C1 &D2 +FCLASS=3D0"
--------------------------------/etc/wvdial.conf---------------------------=
--
[Modem0]
Modem =3D /dev/modem
Baud =3D 57600
SetVolume =3D 1
Dial Command =3D ATDT
Init1 =3D ATZ
Init3 =3D ATM1L1
FlowControl =3D CRTSCTS
[Dialer BSNL]
Username =3D purelife
Password =3D uma579
Phone =3D 172233
Stupid Mode =3D 1
Init1 =3D ATZ
Init2 =3D ATQ0 V1 E1 S0=3D0 &C1 &D2 +FCLASS=3D0
Inherits =3D Modem0
[Dialer Defaults]
Modem =3D /dev/ttySL0
Baud =3D 460800
Init1 =3D ATZ
Init2 =3D ATQ0 V1 E1 S0=3D0 &C1 &D2 +FCLASS=3D0
ISDN =3D 0
Modem Type =3D Analog Modem
Phone =3D 172233
Username =3D purelife
Password =3D uma579
Carrier Check =3D No
Stupid Mode =3D On
-------------------------------output of wvdial---------------------------
--> WvDial: Internet dialer version 1.54.0
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=3D0 &C1 &D2 +FCLASS=3D0
ATQ0 V1 E1 S0=3D0 &C1 &D2 +FCLASS=3D0
OK
--> Modem initialized.
--> Sending: ATDT172233
--> Waiting for carrier.
ATDT172233
NO DIALTONE
--> No dial tone.
--> Disconnecting at Sun Aug 28 21:18:18 2005
-----------------------------output of /var/log/dmesg----------------------=
--------
Aug 28 21:17:27 localhost kernel: codec_semaphore: semaphore is not ready [=
0x1][0x701300]
Aug 28 21:17:27 localhost kernel: codec_write 1: semaphore is not ready for=
register 0x54
Aug 28 21:17:40 localhost kernel: codec_semaphore: semaphore is not ready [=
0x1][0x701300]
Aug 28 21:17:40 localhost kernel: codec_read 1: semaphore is not ready for =
register 0x54
Aug 28 21:18:13 localhost kernel: codec_semaphore: semaphore is not ready [=
0x1][0x701300]
Aug 28 21:18:13 localhost kernel: codec_read 1: semaphore is not ready for =
register 0x54
Aug 28 21:18:18 localhost kernel: codec_semaphore: semaphore is not ready [=
0x1][0x701300]
Aug 28 21:18:18 localhost kernel: codec_read 1: semaphore is not ready for =
register 0x54
Aug 28 21:19:41 localhost login(pam_unix)[2064]: authentication failure; lo=
gname=3D uid=3D0 euid=3D0 tty=3Dtty3 ruser=3D rhost=3D user=3Droot
Aug 28 21:19:44 localhost login[2064]: FAILED LOGIN 1 FROM (null) FOR root,=
Authentication failure
Aug 28 21:19:48 localhost login(pam_unix)[2064]: session opened for user ro=
ot by (uid=3D0)
Aug 28 21:19:48 localhost -- root[2064]: ROOT LOGIN ON tty3
Aug 28 21:20:02 localhost crond(pam_unix)[2593]: session opened for user ro=
ot by (uid=3D0)
Aug 28 21:20:02 localhost crond(pam_unix)[2594]: session opened for user ro=
ot by (uid=3D0)
Aug 28 21:20:02 localhost crond(pam_unix)[2594]: session closed for user ro=
ot
Aug 28 21:20:02 localhost crond(pam_unix)[2593]: session closed for user ro=
ot
Aug 28 21:22:28 localhost kernel: codec_semaphore: semaphore is not ready [=
0x1][0x701300]
Aug 28 21:22:28 localhost kernel: codec_read 1: semaphore is not ready for =
register 0x54
Aug 28 21:22:33 localhost kernel: codec_semaphore: semaphore is not ready [=
0x1][0x701300]
Aug 28 21:22:33 localhost kernel: codec_read 1: semaphore is not ready for =
register 0x54
Aug 28 21:22:50 localhost kernel: atkbd.c: Unknown key pressed (translated =
set 2, code 0xb3 on isa0060/serio0).
Aug 28 21:22:50 localhost kernel: atkbd.c: Use 'setkeycodes e033 <keycode>'=
to make it known.
Aug 28 21:22:50 localhost kernel: atkbd.c: Unknown key released (translated=
set 2, code 0xb3 on isa0060/serio0).
Aug 28 21:22:50 localhost kernel: atkbd.c: Use 'setkeycodes e033 <keycode>'=
to make it known.
Aug 28 21:23:30 localhost kernel: codec_semaphore: semaphore is not ready [=
0x1][0x701300]
Aug 28 21:23:30 localhost kernel: codec_read 1: semaphore is not ready for =
register 0x54
Aug 28 21:23:36 localhost kernel: codec_semaphore: semaphore is not ready [=
0x1][0x701300]
Aug 28 21:23:36 localhost kernel: codec_read 1: semaphore is not ready for =
register 0x54
Aug 28 21:25:02 localhost crond(pam_unix)[2606]: session opened for user ro=
ot by (uid=3D0)
Aug 28 21:25:02 localhost crond(pam_unix)[2606]: session closed for user ro=
ot
--=20
______________________________________________
IndiaInfo Mail - the free e-mail service with a difference! www.indiainfo.c=
om=20
Check out our value-added Premium features, such as an extra 20MB for mail =
storage, POP3, e-mail forwarding, and ads-free mailboxes!