[Ilugc] Need help in configuring cent os squid proxy server
- From: knura9@xxxxxxxxx (Arun Khan)
- Date: Wed, 26 Mar 2014 21:23:31 +0530
On Wed, Mar 26, 2014 at 8:32 PM, mani vannan <bamanicse at gmail.com> wrote:
Web server ip address will be 10.5.0.1 static
My doubts
1.what should be the gateway for eth1 interface. either 10.5.0.1 or eth0
ipadrsss or eth0 gateway address
2. what should be my nameserver ip address.
3. what should be my dns server ip address? can i configure google dns
address for forwarding request.
4 . How should need to configure my dns server for forwarding.
Need to enable auto proxy discovery used wpad.dat
note:
All server service should be configuired with in one machine.
Basically i am php developer, but for my work myself have to configure
server and dont have much knowledge on server configuration,
Thanks hope some one can help me, if i left any information from my
I sympathize with your situation. As a developer you are not familiar
with server setup and IT infrastructure services.
You need help in too many areas and there is a learning curve in each of those.
You can try using some of the appliances like pfsense, ipcop etc. but
still you need to have a reasonable understanding of the services you
want to use.
If time is of essence, to your organization, then I would suggest you
request your manager to seek professional help with all of the above.
A competent sys admin can do your setup in about one day's effort.
A different perspective - I have a PHP application that needs some
customization. I am able to understand bits and pieces of the code
but not enough to go through the source code and figure out where to
make the changes. I could teach myself PHP through books, various
fora, become competent to read the code and make the changes. This
may take me 2-3 months but time is of essence to me - my client will
not wait that long. I would be better off assigning the job to a
competent developer, get it done and have a satisfied client :)
-- Arun Khan
Other related posts: