Greetings!!
In the output of dmesg, I see some errors. I dont know what they are.
Can someone help me rectify this. I dont see any noticable problems
created though.
The problematic lines in the output of dmesg are:
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI-1138: *** Error: Method execution failed [\MCTH] (Node
def2d520), AE_AML_BUFFER_LIMIT
ACPI-1138: *** Error: Method execution failed [\OSFL] (Node
def2dfc0), AE_AML_BUFFER_LIMIT
ACPI-1138: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.SYSR._CRS] (Node dea91d00), AE_AML_BUFFER_LIMIT
ACPI-0158: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.SYSR._CRS] (Node dea91d00), AE_AML_BUFFER_LIMIT
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
ACPI-1138: *** Error: Method execution failed [\MCTH] (Node def2d520), AE_AM
L_BUFFER_LIMIT
ACPI-1138: *** Error: Method execution failed [\OSFL] (Node
def2dfc0), AE_AML_BUFFER_LIMIT
ACPI-1138: *** Error: Method execution failed [\_SB_.SYSM._CRS]
(Node dea91b40), AE_AML_BUFFER_LIMIT
ACPI-0158: *** Error: Method execution failed [\_SB_.SYSM._CRS]
(Node dea91b40), AE_AML_BUFFER_LIMIT
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@xxxxxx
** so I can fix the driver.
ACPI-1138: *** Error: Method execution failed [\MCTH] (Node
def2d520), AE_AML_BUFFER_LIMIT
ACPI-1138: *** Error: Method execution failed [\OSFL] (Node
def2dfc0), AE_AML_BUFFER_LIMIT
ACPI-1138: *** Error: Method execution failed [\_SB_.SYSM._CRS]
(Node dea91b40), AE_AML_BUFFER_LIMIT
ACPI-0158: *** Error: Method execution failed [\_SB_.SYSM._CRS]
(Node dea91b40), AE_AML_BUFFER_LIMIT
ACPI-1138: *** Error: Method execution failed [\MCTH] (Node
def2d520), AE_AML_BUFFER_LIMIT
ACPI-1138: *** Error: Method execution failed [\OSFL] (Node
def2dfc0), AE_AML_BUFFER_LIMIT
ACPI-1138: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.SYSR._CRS] (Node dea91d00), AE_AML_BUFFER_LIMIT
ACPI-0158: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.SYSR._CRS] (Node dea91d00), AE_AML_BUFFER_LIMIT
pnp: 00:0a: ioport range 0x400-0x47f could not be reserved
pnp: 00:0a: ioport range 0x680-0x6ff has been reserved
pnp: 00:0a: ioport range 0x500-0x53f has been reserved
Is this a software or hardware problem? I am running Debian Sid.
Thank You,
--
Prashanth Mohan
http://prashanthmohan.tk
http://prashmohan.blogspot.com
---
And so at last the beast fell and the unbelievers rejoiced. But all
was not lost, for from the ash rose a great bird. The bird gazed down
upon the unbelievers and cast fire and thunder upon them. For the
beast had been reborn with its strength renewed, and the followers of
Mammon cowered in horror.
from The Book of Mozilla, 7:15
---