[Ilugc] intent connection setup for ubuntu

  • From: thangam.arunx@xxxxxxxxx (தங்கமணி அருண்)
  • Date: Fri Feb 20 01:08:03 2009

try configuring ip address in manually with
ip address
netmask
gateway
dns1
dns2

then try ping your dns and google..whatever u wish


On Thu, Feb 19, 2009 at 2:15 PM, Bharathi Subramanian <
sbharathi@xxxxxxxxxxxxx> wrote:

On Thu, 19 Feb 2009, aadhil wrote:

reciving sending pockets iam hatway connection it is a cable modem i
have congfigred manually ip subnet mask gate way but not working any
excisting hatway users can guide me .

I hope, you are using the modem's Ethernet Port and Not the USB Port.
You have to configure 'ethX' interface IP, Subnet Mask (usually
255.255.255.0), Gateway IP and DNS IP.

1. Check your configuration by running 'ifconfig' command.
2. In ifconfig output check Rx Packet count is increasing.
3. Ping the Gateway IP
4. Ping the DNS IP
5. Ping to Google

Modem and Connection is already working.  So I think, Something wrong
with NIC configuration. Failure at each of above step will give you
some idea about the problem.

Bye :)
--
Bharathi S

_______________________________________________
To unsubscribe, email ilugc-request@xxxxxxxxxxxxx with
"unsubscribe <password> <address>"
in the subject or body of the message.
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc




-- 
????????
?????
------------------------------
http://ubuntu-tam.org
http://lists.ubuntu.com/ubuntu-l10n-tam
http://lists.ubuntu.com/ubuntu-tam
------------------------------

Other related posts: