[Ilugc] tar question

  • From: knura9@xxxxxxxxx (Arun Khan)
  • Date: Thu Feb 25 10:40:02 2010

Hi Raja,

Please see below.

On Tue, Feb 23, 2010 at 8:23 PM, Raja Subramanian
<rajasuperman@xxxxxxxxx> wrote:

On Tue, Feb 23, 2010 at 7:27 PM, Arun Khan <knura9@xxxxxxxxx> wrote:
Did not try mt -f /dev/nst0 fsf 1 though. ?Seems like a complicated
process if I have to repeat "mt -f /dev/nst0 fsf 1" for 500+ K files
that are typically found in animation/sfx archives.

Ah, now I understand the back ground.

A few months ago, I had to help someone extracting zillions of dpx files
from an LTO3 tape created on an IRIX box. ?I used an external HP SCSI
tape drive on a CentOS box and extracted everything using this command:
? ?tar -b 1024 -xMvf /dev/nst0

Took a lot of head-scratching to find that the -M flag did the trick.

However, I can't remember if I got the Block of NULs error which you
mention. ?YMMV.

Going by the hypothesis that the tape indeed had "multi volume" and
that I used the incorrect device /dev/st0 (instead of /dev/nst0),   I
think it is a reasonable assumption that there would be much more than
"one" file in each volume (considering my tape archive was supposed to
have animation frames)?

So in my case there should have been more than one file in the first
volume, retrieved using /dev/st0,

Any thoughts/comments?

Thanks,
-- Arun Khan

Other related posts: