Il 26 luglio 2010 15.23, Paolo Larcheri <paolo.larcheri@xxxxxxxxx> ha scritto: > > Trovato, eccolo: > http://www.candelatech.com/pipermail/vlan/2006-May/000689.html > Provato e pare accettare, anche se come output del TCPDUMP non cambia assolutamente nulla. Poi nota la differenza: # vconfig set_flag vlan2 0 1 Set flag on device -:vlan2:- Should be visible in /proc/net/vlan/vlan2 # cat /proc/net/vlan/vlan2 vlan2 VID: 2 REORDER_HDR: 0 dev->priv_flags: 1 total frames received 222 total bytes received 18496 Broadcast/Multicast Rcvd 0 total frames transmitted 2875 total bytes transmitted 132958 total headroom inc 0 total encap on xmit 0 Device: eth5 INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 EGRESSS priority Mappings: # vconfig set_flag vlan2 1 Set flag on device -:vlan2:- Should be visible in /proc/net/vlan/vlan2 # cat /proc/net/vlan/vlan2 vlan2 VID: 2 REORDER_HDR: 0 dev->priv_flags: 1 total frames received 222 total bytes received 18496 Broadcast/Multicast Rcvd 0 total frames transmitted 2875 total bytes transmitted 132958 total headroom inc 0 total encap on xmit 0 Device: eth5 INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 EGRESSS priority Mappings: Io non noto differenze....... mha. Jan -- Per iscriversi (o disiscriversi), basta spedire un messaggio con OGGETTO "subscribe" (o "unsubscribe") a mailto:linuxtrent-request@xxxxxxxxxxxxx