============== Grazie - Ciao, PAOLO ============== -----Messaggio originale----- Da: linuxtrent-bounce@xxxxxxxxxxxxx [mailto:linuxtrent-bounce@xxxxxxxxxxxxx] Per conto di Marco Ciampa Inviato: mercoledì 5 ottobre 2005 18.15 A: linuxtrent@xxxxxxxxxxxxx Oggetto: [Linuxtrent] Re: Problema in installazione Suse linux 9.3 On Tue, Oct 04, 2005 at 02:16:57PM +0200, Paolo Vivaldelli wrote: > ======================================================================== > ==== > > > PS: riassumo di seguito i dati hardware del sistema: > > Pentium III ? 733 MHz > Ram = 512 Mb > HD C: = 40 Gb ? NTFS per sistemi operativi WINDOWS + LINUX > HD E: = 20 Gb ? NTFS per dati > > Scheda video = intel 82815 Graphics Controller > > ======================================================================== > ==== > > > Mi hanno suggerito che il problema è sicuramente nel frame buffer > abilitato > (e la mia scheda video "intel 82815 graphics Controller" probabilmente > non > è supportata in questa modalità), solo che non so in SuSE come fare per > disabilitarlo al boot. > > > > Mi dispiacerebbe tanto dover desistere senza poter apprezzare SUSE LINUX > 9.3 > > Potete aiutarmi ? > Cercando su internet ho trovato: http://support.intel.com/support/graphics/intel810/sb/CS-009118.htm System Problems Does the vesafb frame-buffer module work on the Intel® 810 and Intel® 815 Chipset Families? No. The vesafb module can only make use of linear VESA modes. The Intel® 810 and Intel 815 chipset families use banked modes and therefore, cannot boot into a frame-buffer. It would be possible to add banked mode support to the vesafb driver, but as of yet there are no plans to do so. The vga 16 color frame-buffer available in recent Linux* kernels does function properly and can be used in place of the vesafb frame-buffer. La cosa più importante è qui: I installed the X Server but I only get a few low resolution modes. What is wrong? The Intel 810 and Intel 815 chipset families do not have any RAM of its own. Since the graphics chip is integrated into the chipset it can use system RAM for graphics memory. A 'agpgart' kernel module needs to be installed so that the kernel can allocate this RAM for the graphics chip. There is a section in the Intel® 810 and 815 Chipset Family Linux* Graphics Release Notes under 'X server installation' detailing this. Leggendo il tuo problema _potrebbe_ non centrare molto con il frame buffer in sé (che non credo tu stia usando) quanto sul fatto che la scheda video in questione è del tipo a memoria condivisa. Cioè essa non ha ran video per conto suo ma 'usa' parte della ram del sistema. Entra nel bios della macchina e controlla quanta ram è dedicata alla scheda video (quantità tipiche sono 4/8/16 Mbyte) Sulle vecchie macchine come la tua alle volte il bios comunica una quantità di memoria errata e linux, quando parte la grafica, si sovrappone in memoria. Per ovviare a tal problema basta aggiungere alla riga di boot il comando mem= seguito alla quantità di memoria rimanente per il sistema. Se per esempio il tuo pc dedica, per esempio, 8 M di memoria a linux dovresti passare il valore di 512-8=504M mem=504M per maggiori informazioni: man bootparam -- Marco Ciampa +--------------------+ | Linux User #78271 | | FSFE fellow #364 | +--------------------+ -- Per iscriversi (o disiscriversi), basta spedire un messaggio con OGGETTO "subscribe" (o "unsubscribe") a mailto:linuxtrent-request@xxxxxxxxxxxxx -- Per iscriversi (o disiscriversi), basta spedire un messaggio con OGGETTO "subscribe" (o "unsubscribe") a mailto:linuxtrent-request@xxxxxxxxxxxxx