[opendtv] ATSC 3.0 USB receivers

  • From: "Manfredi (US), Albert E" <albert.e.manfredi@xxxxxxxxxx>
  • To: "opendtv@xxxxxxxxxxxxx" <opendtv@xxxxxxxxxxxxx>
  • Date: Mon, 13 Jan 2020 05:00:29 +0000

Well, here's some hope.

https://www.cnx-software.com/2019/06/05/geniatech-a683-atsc-3-0-usb-tv-tuner/

"Nevertheless, if you want to watch or record programs in ATSC 3.0 channels, 
you'll need new hardware, and currently most TVs won't ship with an ATSC 3.0 
tuner, so an easier way is to use USB adapters and Geniatech has just announced 
A683 ATSC 3.0 USB TV Tuner."

Advertises that with 2X2 MIMO and 8 MHz channels, it will go up to 157 Mb/s. 
But the whole spec sheet is very flaky. Confusing mention of 8-VSB as the only 
scheme from a 75 ohm antenna lead, plus no mention of H.265 compression.

https://www.antennajunkies.com/atsc-3-0-tuner-hardware-available-now/

"I'm very excited to share some news that ATSC 3.0 Tuner Kits are now available 
to purchase and start streaming crystal clear HDTV content in 4K. Airwavz.tv 
has recently release a ATSC 3.0 Tuner Kit that is capable of picking up ATSC 
3.0 signal directly from broadcast towers."

This is a "prosumer" kit, for $2000. Still, maybe something cheaper should be 
expected soon?

Not much out there yet, nor did I see anything interesting out of CES 2020, 
aside from a few built-in receivers in a very few top of the line TV sets.

Bert

 
 
----------------------------------------------------------------------
You can UNSUBSCRIBE from the OpenDTV list in two ways:

- Using the UNSUBSCRIBE command in your user configuration settings at 
FreeLists.org 

- By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word 
unsubscribe in the subject line.

Other related posts:

  • » [opendtv] ATSC 3.0 USB receivers - Manfredi (US), Albert E