Yes. Power is designated based on horizontal, and one may choose to ADD up to 100% into the vertical component. So, one would require 2x xmit power with full CP.
Mark A. Aitken Director of Advanced Technology Sinclair Broadcast Group (443) 677-4425 Mobile (410) 568-1535 Desk Connected by DROID on Verizon Wireless -----Original message----- From: "Manfredi, Albert E" <albert.e.manfredi@xxxxxxxxxx> To: "opendtv@xxxxxxxxxxxxx" <opendtv@xxxxxxxxxxxxx> Sent: Fri, Apr 22, 2011 21:32:26 GMT+00:00Subject: [opendtv] Re: Circular, elliptical antenna polarization improves mobile DTV reception reliability, says Schadler
Dale Kelly wrote:
SPX Communication Technology director of Advanced Antenna Systems
Development
http://broadcastengineering.com/news/circular-ellliptical-antenna-polarizatio n-042111/John Schadler says circular and elliptical polarized DTV antennas are important tools in delivering a mobile DTV signal viewers can count on. *
*The benefits of Circular /elliptical polarization are well know and
became
standard practice about 60 years ago for FM radio broadcasters to enable reliable reception in moving vehicles.C.P was also used to improve reception of fixed analog TV receivers in
many
difficult reception conditions and is also utilized at a number of the DTV installations, particularly those constructed by Pappas telecasting. Our first C.P. television installation was a high powered fully circular antenna at WHNS-TV CH. 21, in North/South Carolina (about 1983). This 200 KW transmitter is at a high mountain top installation near Brevard N.C. and resulted in the very best UHF reception in my experience, which is extensive. Within days of signing this station on the air we received a call from Georgia Public TVs Director of engineering asking; "what are y'all doing up there? I'm over a hundred and thirty miles away from your site and have perfect reception from a standard UHF antenna which is indoors on the floor. He was so impressed he visited the site to see this minor miracle in person.
Cool.My take is, the reason that circular or elliptical polarization is also helpful for those with horizontal receive antennas is because it restores some of the signal that is lost with reflections and scatter. A horizontally polarized transmitted signal might not remain horizontally polarized, as it reflects off non-horizontal surfaces. So a horizontally polarized receive antenna would see a loss of signal strength, more than just that caused by distance from the transmitter.
A similarly reflected or scattered CP signal, instead, if the reflection didn't cause a lot of attenuation too, would look to a horizontally polarized receive antenna like a full strength signal.
The only issue is power. Does the FCC allow power to be increased if the transmit antenna is circularly polarized, compared to just horizontal or just vertical polarization? If not, then going to CP (especially) would possibly hurt some of the receivers out there. If no power increase is allowed, elliptical would be less of a potential liability for horizontally polarized receive antennas.
Bert ---------------------------------------------------------------------- You can UNSUBSCRIBE from the OpenDTV list in two ways:- Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.