At NAB Vanguard was showing a RT PC-based SW decode in their booth. Not sure what type or config of PC, but it was a tower-type box. There were others as well A couple of months back Broadcom announced a new H.265 decoder chip. http://www.broadcom.com/press/release.php?id=s732069 Knowing Broadcom, there will be a growing family of H.265/HEVC System on a Chip chips that include everything from the HDMI 2.0 to the 802.11xx to the memory interface, PVR I/O, and all kinds of other stuff, kinda like what they've done for many other SoC chips for Blu-ray players, STBs and DTVs. There will be many others. Encoders too. BTW - I forget if I mentioned it, but Motorola was showing their 1RU rack mount PC-Based H.265/HEVC encoder. Not sure what type or config of PC was buried inside it but I know it was running the Vanguard encoder SW. - Tom Tom McMahon Del Rey Consultancy TLM@xxxxxxxxxx WWW.DelRey.Com -----Original Message----- From: opendtv-bounce@xxxxxxxxxxxxx [mailto:opendtv-bounce@xxxxxxxxxxxxx] On Behalf Of Manfredi, Albert E Sent: Friday, April 12, 2013 2:58 PM To: opendtv@xxxxxxxxxxxxx Subject: [opendtv] Re: WTF is... H.265 aka HEVC? TLM posted: > Good write-up: http://www.theregister.co.uk/2013/04/11/feature_wtf_is_h265_hevc/ The new information that was most interesting to me, in this article, was that it takes 2X to 3X the computing power to decode H/265, and 10X more power to encode it. When H.264 came out, requiring similar extra oomph compared with H.263, my PCs of the time did not cope very well. Chronically jerky video. So I ask again, will today's typical quad-core PCs be up to the decode at least? The article claims that multi-core GPUs are a better bet for H.265 than a simple increase in processor GHz, because the decode is amenable to parallel processing. For sure, since people will want H.265 for their own videos, this will generate a whole new push for higher speeds in PCs, smartphones, and tablets, even if decoding takes less of an effort. The world has changed in this regard. I don't see as much of an advantage in cheap decode and expensive encode anymore, as there once was, perhaps. Bert ---------------------------------------------------------------------- You can UNSUBSCRIBE from the OpenDTV list in two ways: - Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. ---------------------------------------------------------------------- You can UNSUBSCRIBE from the OpenDTV list in two ways: - Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.