[yoshimi] Re: Independent jack outputs for parts?
- From: Will Godfrey <willgodfrey@xxxxxxxxxxxxxxx>
- To: yoshimi@xxxxxxxxxxxxx
- Date: Sat, 28 Nov 2015 17:34:00 +0000
On Fri, 27 Nov 2015 12:58:18 +0100
Lorenzo Sutton <lorenzofsutton@xxxxxxxxx> wrote:
I see and thanks for the detailed explanation... I wonder if it would
make sense to have an option to enable setting all active parts to
'both' without having to do this individually.
(well one could probably hack the xml file and set the <par
name='destination' ... for all parts but I was thinking of something a
bit more user friendly :)
Lorenzo.
it just occurred to me that you can actually do this already without the need
for any changes at all :)
Load up Yoshimi, set it for 64 parts, then go through them all, enabling them,
setting the audio destination to 'Both', then *disable* all of them except part
1.
Close down to 16 parts and save this as a patch set named (say) newdefaults.
Yoshimi stores *all* part data in patch sets, even if the part is disabled.
Close down Yoshimi.
Every time you want this configurations start with the -l argument so:
yoshimi -l {path} newdefaults.xmz
After this, every time you enable a part its direct output pair will be
registered and immediately available. However, I don't recommend leaving unused
parts enabled, as there is a processing overhead even if they are producing no
sound.
--
Will J Godfrey
http://www.musically.me.uk
Say you have a poem and I have a tune.
Exchange them and we can both have a poem, a tune, and a song.
Yoshimi source code is available from either:
http://sourceforge.net/projects/yoshimi
Or:
https://github.com/Yoshimi/yoshimi
Our list archive is at:
https://www.freelists.org/archive/yoshimi
To post, email to yoshimi@xxxxxxxxxxxxx
Other related posts: