On 12.4.2019 12.26, Will Godfrey wrote:
Thank you for this information. Unfortunately -40 is not low enough in part's. Perhaps -60 would do, but switching off at -30 is a better idea.Just did some actual testing using japa, and the results are quite surprising.Correction! AddSynth global and voice min *are* -60dB
Using A=440Hz, virtual keyboard set at max velocity and using the master volume
to set 0dB as read by japa with x10 gain and 60dB range.
Part min is -40
AddSynth global min is -55
Voice min is approx -43
I failed ot notice that the default settings are not 0dB
Also setting everything at 0dB results in an actual output level of slightly
less than 0dB according to jappa.