[access-uk] Re: 3 Connect
- From: "Ibrahim Gucukoglu" <ibrahim_gucukoglu@xxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 15 Mar 2009 17:16:25 -0000
Hi Tony.
Sure, email me privately on ibrahim_gucukoglu@xxxxxxxx
----- Original Message -----
From: Tony Sweeney
To: access-uk@xxxxxxxxxxxxx
Sent: Sunday, March 15, 2009 5:16 PM
Subject: [access-uk] Re: 3 Connect
Hi,
I went there and there are two buttons one for uninstall and the other is to
activate.
I tried to go to help but no joy.
Could I possibly contact you off list further re this?
Tony
----- Original Message -----
From: Ibrahim Gucukoglu
To: access-uk@xxxxxxxxxxxxx
Sent: Sunday, March 15, 2009 5:03 PM
Subject: [access-uk] Re: 3 Connect
Hi.
Yes, it should be in that program group.
----- Original Message -----
From: Tony Sweeney
To: access-uk@xxxxxxxxxxxxx
Sent: Sunday, March 15, 2009 4:59 PM
Subject: [access-uk] Re: 3 Connect
`Hi Ibrahim,
Is it possible for you to talk me through just exactly wher I should be
looking for?
Do I go in to 3 in programmes for example?
Tony
----- Original Message -----
From: Ibrahim Gucukoglu
To: access-uk@xxxxxxxxxxxxx
Sent: Sunday, March 15, 2009 4:22 PM
Subject: [access-uk] Re: 3 Connect
Hi.
That keystroke is specific to the three connection manager, you can
find a list of keystrokes in the three connect user guide which should be in
the program group under three USB Modem.
All the best, Ibrahim.
----- Original Message -----
From: Tony Sweeney
To: access-uk@xxxxxxxxxxxxx
Sent: Sunday, March 15, 2009 4:21 PM
Subject: [access-uk] Re: 3 Connect
Hi Ibrahim,
It worked not only for 'connect but for 'disconnect too!
After pressing alt and C I hit the left mouse button.
Now as a matter of interest is that a windows or a Jaws keystroke?
Thanks a Mil for that.
Tony
----- Original Message -----
From: Ibrahim Gucukoglu
To: access-uk@xxxxxxxxxxxxx
Sent: Sunday, March 15, 2009 4:12 PM
Subject: [access-uk] Re: 3 Connect
Hi Tony.
Try alt and C, that should activate the connect button if I'm not
mistaken.
----- Original Message -----
From: Tony Sweeney
To: access-uk@xxxxxxxxxxxxx
Sent: Sunday, March 15, 2009 3:51 PM
Subject: [access-uk] 3 Connect
Hi All,
Was a little premature with my last message to the list I'm
afraid!
The left mouse button doesn't always work with connect/disconnect
from the 3 mobile broadband using ZTE modem.
It's a bit hit and miss now really.
However when you are on the ZTE when you route jaws to PC and
then down/uparrow it gives you good enough information of it''s status and you
then find the disconnect/connect button go off that and go back on it again
then hitting the left mouse button for it to respond for you.
Anyway at least that works for me!
Tony
Other related posts: