[access-uk] Re: NC10

  • From: Mobeen Iqbal <mobeeniqbal@xxxxxxxxx>
  • To: access-uk@xxxxxxxxxxxxx
  • Date: Wed, 14 Jan 2015 21:23:21 +0000

hi.
if its completely black the memory's probably incompatible. are you sure you bought the right specification of DDR memory for your netbook? there are a lot of varients/brands you can choose from. the NC10 as far as i can remember you have to strip down to get to the ram slot, or does yours have a door on the back? be careful how you put it back together and make sure your screen cables and components are seated correctly. 

all the best,

Mo.

On 14/01/2015 21:15, Ali wrote:

Hi,
nothing at all, it is a black screen.

Thank you

Ali


------------------------------------------------------------------------
*From:* access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] *On Behalf Of *Ibrahim Gucukoglu 
*Sent:* 14 January 2015 21:07
*To:* access-uk@xxxxxxxxxxxxx
*Subject:* [access-uk] Re: NC10

Hi Ali.
Are there any messages displayed on screen? If the memory has not been installed correctly, there will be an error from the BIOS and Windows will not boot. 
All the best, Ibrahim.
*From:* Ali <mailto:alpot77@xxxxxxxxxxxxxx>
*Sent:* Wednesday, January 14, 2015 7:18 PM
*To:* access-uk@xxxxxxxxxxxxx <mailto:access-uk@xxxxxxxxxxxxx>
*Subject:* [access-uk] NC10
Hi all,
I just bought a 2gb RAM for my NC10. I replaced the old 1gb with this one. However, the netbook does not turn on. I changed the ram back to the original 1gb module still the same. The hard drive starts spinning but nothing happens. Does anyone have any idea what went wrong? Is there a reset button or something I can reset the unit? 

Thank you

Ali

Other related posts:

  1. Home
  2. access-uk
  3. Archive
  4. 01-2015