[access-uk] Re: NC10
- From: "Ali" <alpot77@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 14 Jan 2015 21:38:32 -0000
Hi,
I do not think it has anything to do with the memory compatibility, as it
does not start up with the original memory module is re-installed. There is
a memory compartment door where the ram is accessed.
Thank you
Ali
_____
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Mobeen Iqbal
Sent: 14 January 2015 21:23
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: NC10
hi.
if its completely black the memory's probably incompatible. are you sure you
bought the right specification of DDR memory for your netbook? there are a
lot of varients/brands you can choose from. the NC10 as far as i can
remember you have to strip down to get to the ram slot, or does yours have a
door on the back? be careful how you put it back together and make sure your
screen cables and components are seated correctly.
all the best,
Mo.
On 14/01/2015 21:15, Ali wrote:
Hi,
nothing at all, it is a black screen.
Thank you
Ali
_____
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Ibrahim Gucukoglu
Sent: 14 January 2015 21:07
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: NC10
Hi Ali.
Are there any messages displayed on screen? If the memory has not been
installed correctly, there will be an error from the BIOS and Windows will
not boot.
All the best, Ibrahim.
From: Ali <mailto:alpot77@xxxxxxxxxxxxxx>
Sent: Wednesday, January 14, 2015 7:18 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] NC10
Hi all,
I just bought a 2gb RAM for my NC10. I replaced the old 1gb with this one.
However, the netbook does not turn on. I changed the ram back to the
original 1gb module still the same. The hard drive starts spinning but
nothing happens. Does anyone have any idea what went wrong? Is there a
reset button or something I can reset the unit?
Thank you
Ali
Other related posts: