[access-uk] Re: PROBLEMS WITH THE QUBE!
- From: Carol Pearson <carol.pearson29@xxxxxxxxxxxxxx>
- To: "access-uk@xxxxxxxxxxxxx" <access-uk@xxxxxxxxxxxxx>
- Date: Thu, 10 Jan 2013 19:48:32 +0000
Sorry, think we need to discuss this! I'll leave it to you to ring at your
convenience, when ever!
Thanks!
Carol P
Sent from my iPhone
On 10 Jan 2013, at 07:31 PM, Mobeen Iqbal <mobeeniqbal@xxxxxxxxx> wrote:
> Hi Carol,
>
> Try the following path, replace username with your actual username.
>
> c:\users\username\AppData\Roaming
>
> The qube settings folder normally resides there.
>
> let me know if that works for you.
>
> Mo.
>
>
> On 10/01/2013 19:27, Carol Pearson wrote:
>> Would be handy to know exactly which folders I'm looking for and how I am
>> sure I take the right ones out! Thanks for your offer to call. Hopefully I
>> can that decision to you!
>>
>>
>>
>> Carol P
>> Sent from my iPhone
>>
>> On 10 Jan 2013, at 05:44 PM, Mobeen Iqbal<mobeeniqbal@xxxxxxxxx> wrote:
>>
>>> No, all you have to do is run the qube again and it should ask you to
>>> reauthorise with twitter. its strange that it should just stop working. I
>>> always tend to run mine from a specific folder on my hard drive so it
>>> doesn't store its settings in the windows profile folders. If you'd like a
>>> hand let me know and i'll give you a call for a few mins to show you where
>>> the folder is. there are 3 different profile folders. enable display of
>>> hidden folders, then pop in to users, then your username, then application
>>> data then either the local, local.lo or roming folders either of those 3
>>> could contain the qube's settings.
>>>
>>> all the best,
>>>
>>> Mo.
>>>
>>>
>>> On 10/01/2013 05:32, Carol Pearson wrote:
>>>> Using Windows 7!
>>>>
>>>> So what when I've deleted the folder. Do I just have to reinstall the
>>>> Qube? Sorry, not quite clear!
>>>>
>>>> Carol P - With thanks, as always!
>>>>
>>>>
>>>> On 10/01/2013 17:29, Mobeen Iqbal wrote:
>>>>> Hi Carol.
>>>>>
>>>>> Try resetting your settings for the qube. Are you running windows7 or XP?
>>>>> the settings are stored in documents and settings, username, application
>>>>> data under the qube folder. just delete the qube folder. If you let me
>>>>> know the OS i'll try to assist further. i assumed you were running xp
>>>>> above.
>>>>>
>>>>> all the best,
>>>>>
>>>>> Mo.
>>>>>
>>>>>
>>>>> On 10/01/2013 17:11, jeff flint wrote:
>>>>>> Hi Carol,
>>>>>> I can't give you the details, but can tell you what happened to me.
>>>>>> I had exactly this problem before Christmas.
>>>>>> I had gone home to Australia for the holidays.
>>>>>> Tried to use it and couldn't simply wouldn't acknowledge me.
>>>>>> I was using Windows XP and Jaws 12.
>>>>>> A nephew of mine look at the computer for me and worked backwards on the
>>>>>> windows updates and brought me back to an early version.
>>>>>> It then worked.
>>>>>> Got back from holidays last week, had a few problems with the computer
>>>>>> and in a moment of lose mindedness updated windows.
>>>>>> Guess what, the problem is back.
>>>>>> Am hoping nephew in Australia might be able to tell me what the problem
>>>>>> was, I have emailed him.
>>>>>> Our problems might not be the same but I just thought I would mention it.
>>>>>> Jeff
>>>>>>
>>>>>> ----- Original Message ----- From: "Carol
>>>>>> Pearson"<carol.pearson29@xxxxxxxxxxxxxx>
>>>>>> To:<access-uk@xxxxxxxxxxxxx>
>>>>>> Sent: Thursday, January 10, 2013 4:36 AM
>>>>>> Subject: [access-uk] PROBLEMS WITH THE QUBE!
>>>>>>
>>>>>>
>>>>>>> Hi all,
>>>>>>>
>>>>>>> I'm desperate for a fix for this one and have trawled the net (as best
>>>>>>> I can) and just found some have experienced this one but only one found
>>>>>>> an answer, but this isn't the cause for me, though the problem is the
>>>>>>> same! (The answer I found was from Steve Button on the BCAB list, so I
>>>>>>> figure folk on this list may be able to help!
>>>>>>>
>>>>>>> Basically, the Qube suddenly stopped getting, or receiving, an Access
>>>>>>> Token from Twitter somewhere around the end of October, possibly. Try
>>>>>>> as I may, I cannot find a solution. Have reinstalled, checked for disc
>>>>>>> errors and checked out that my time and date are correct (as Steve had
>>>>>>> found his had been changed). So what can I do now, please? I'm really
>>>>>>> very keen to use this on my desktop as it's by far the quickest and
>>>>>>> most effective programme for Tweeting that I know!<Smiles>
>>>>>>>
>>>>>>> Anyone who solves this one will be a star with me!<Smiles>
>>>>>>>
>>>>>>> Thanks a lot for any help you can give.
>>>>>>>
>>>>>>> Carol P
>>>>>>>
>>>>>>> ** To leave the list, click on the immediately-following link:-
>>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>>>> ** If this link doesn't work then send a message to:
>>>>>>> ** access-uk-request@xxxxxxxxxxxxx
>>>>>>> ** and in the Subject line type
>>>>>>> ** unsubscribe
>>>>>>> ** For other list commands such as vacation mode, click on the
>>>>>>> ** immediately-following link:-
>>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>>>>> ** or send a message, to
>>>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>>> ** To leave the list, click on the immediately-following link:-
>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>>> ** If this link doesn't work then send a message to:
>>>>>> ** access-uk-request@xxxxxxxxxxxxx
>>>>>> ** and in the Subject line type
>>>>>> ** unsubscribe
>>>>>> ** For other list commands such as vacation mode, click on the
>>>>>> ** immediately-following link:-
>>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>>>> ** or send a message, to
>>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>>> ** To leave the list, click on the immediately-following link:-
>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>>> ** If this link doesn't work then send a message to:
>>>>> ** access-uk-request@xxxxxxxxxxxxx
>>>>> ** and in the Subject line type
>>>>> ** unsubscribe
>>>>> ** For other list commands such as vacation mode, click on the
>>>>> ** immediately-following link:-
>>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>>> ** or send a message, to
>>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>> ** To leave the list, click on the immediately-following link:-
>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>>> ** If this link doesn't work then send a message to:
>>>> ** access-uk-request@xxxxxxxxxxxxx
>>>> ** and in the Subject line type
>>>> ** unsubscribe
>>>> ** For other list commands such as vacation mode, click on the
>>>> ** immediately-following link:-
>>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>>> ** or send a message, to
>>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: