Hi George et al, I looked on the HP website and found the series 1000. Under Windows 7 however it seemed to be not available, but will try again later. Thanks. I then had trouble with my laptop, where it says that IE8 had a problem and the tab had to be reloaded; it would not allow access to the Blackboard at University. The Tech guys loaded on Firefox, but it closed Firefox when the page was trying to be accessed. The processor was running at 35 to 50% capacity, which is high, even for JFW! It is an I3 Toshiba laptop, 4Gb ram..... It seemed that single pop up windows would work alright, but multiple pop up pages were blocked/caused the problem. They had never seen the like of it before..... Anyone? They were looking at a .dll file, I think it was _flash something acr.dll. Thanks, Mike -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of George Bell Sent: 17 November 2010 09:21 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: Printer driver Hi Mike, You will need to know the exact model number since there are various in the 1000 series. Certainly it appears that some models will work with Windows 7 64 bit, but without that finer detail, it's impossible to be certain either which way. George. -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Mike Moore Sent: 16 November 2010 22:46 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Printer driver Hello, I have an old HP series 1000 laserjet printer. Is there any chance that I can get a driver for Windows 7 64bit? Any help much appreciated. Regards, Mike -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of David Bailes Sent: 16 November 2010 16:16 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Getting to contacts in wlm 2011 In a previous post I said that there weren't any single keystrokes to get to contacts etc in windows live mail 2011, and described a method using f6 and arrow keys. I've just found out that that in fact there are single keystrokes available: ctrl+1 for mail, ctrl+2 for calender, ctrl+3 for contacts, ctrl+4 for feeds, and ctrl+5 for newsgroups. I found this out when having a look at outlook 2010, which has a roughly similar layout to wlm 2011. Unlike wlm, there is help available for outlook which includes all the available shortcuts. It uses ctrl+1 etc, and I guessed that these might also work in wlm 2011. David. ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq