[access-uk] Re: Printing AFB Labels
- From: "Jackie Cairns" <jackie.cairnsplace@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 13 Dec 2009 13:22:29 -0000
Hi Eleanor
When I bought the laser, I was in the middle of my HND Journalism course, so
I needed to run off loads of documents, trust me! (smile). Now I don't use
it much for document printing, but I'm not buying a new printer unless it
conks out as there is nothing wrong with it.
Kind Regards,
J
Jackie Cairns
jackie.cairnsplace@xxxxxxxxxxxxxx
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Eleanor Burke
Sent: 12 December 2009 22:38
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Printing AFB Labels
I've been thinking about your 500 sheets of paper in the lazer and worrying
about them Jackie. if I had 500 pages there they would gather so much dust.
Don't think I would use even that much in a year, well I know I wouldn't.
What about 'saving the planet' Jackie *smile*.
----- Original Message -----
From: "Jackie Cairns" <jackie.cairnsplace@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Saturday, December 12, 2009 10:19 PM
Subject: [access-uk] Re: Printing AFB Labels
> Hi Roger
>
> I don't go into the Envelopes and Labels option within Word to do this. I
> simply open a blank Word document and type the address, then centre it.
> Then I run it off. Only when I do smaller labels on a sheet do I go into
> the Envelopes and Labels option and choose the size I want from there.
>
> Hey! I'll have you know lasers are cheap nowadays. (smile).
>
>
> Kind Regards,
>
> J
>
>
> Jackie Cairns
> jackie.cairnsplace@xxxxxxxxxxxxxx
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
> Of
> roger south
> Sent: 12 December 2009 21:56
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: Printing AFB Labels
>
> Hi Jackie
>
> Nothing so grand as a laser here. A simple Epson S20 inkjet but it suits
> my
> needs as I print realtively little. The paper stands upright in the top of
> the machine, the labels go in the same area in front and to the right of
> the
>
> A4. I have found a shipping label seems the right size and brings the type
> down to the correct area but it too far to the left. I use the envelopes &
> labels command of Tools in Word. The centering would be the justification
> tab I guess. Sounds good. Thanks Jackie.
>
> Roger
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: