[access-uk] Re: Securing a home wireless network
- From: John Gallagher <john@xxxxxxxxxxxxxxxxxxxxxxx>
- To: access-uk@xxxxxxxxxxxxx
- Date: Tue, 16 Jan 2007 19:09:18 +0000
Hi list
Hello Mike I put my numbers in to the first box and checked it so
after the x0 I have my ten digit number.
when I put on my laptop it found several wireless networks so I did a
refresh and I connected to my router.
it then asked for the wep key which I put in on the laptop.
I think it took a few minutes to connect but it did.
At 18:58 16/01/2007, you wrote:
>Hi John,
>Thanks for the info; do you repeat the same 10 digits (are they hex or
>ASCII?) in each of the 4 boxes? I thought you could choose either of the 4
>boxes, no. 1 being the default.
>
>Cheers,
>
>Mike
>
>-----Original Message-----
>From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
>John Gallagher
>Sent: 11 January 2007 19:10
>To: access-uk@xxxxxxxxxxxxx
>Subject: [access-uk] Re: Securing a home wireless network
>
>
>Hi list
>Mike I have just done this not sure if you have my phone number. in my case
>in the four edit boxes you put in a number. if it is 64 bit it is a ten
>digit number. I checked the box I used
>then on my laptop and pk I put in the same number.
>the first time it took a couple of minutes to get on to the network. At
>14:19 11/01/2007, you wrote:
> >Hi listers,
> >
> >I've tried securing my home wireless network via my router using wpa
> >key, but succeeded in securing myself from the network as well, so had
> >to reset the router.
> >
> >All help welcomed with thanks,
> >
> >Mike
> >
> >** To leave the list, click on the immediately-following link:-
> >** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >** If this link doesn't work then send a message to:
> >** access-uk-request@xxxxxxxxxxxxx
> >** and in the Subject line type
> >** unsubscribe
> >** For other list commands such as vacation mode, click on the
> >** immediately-following link:-
> >** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> >** or send a message, to
> >** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** access-uk-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** access-uk-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: