[access-uk] Re: Sky Talker

  • From: Ian Robinson <ian456@xxxxxx>
  • To: access-uk@xxxxxxxxxxxxx
  • Date: Sat, 04 Jun 2011 18:42:17 +0100

Hi John,

Thanks for confirming that.

I'm actually using the Sky Talker without connecting it to any scart leads just 
so the sound isn't distorted.  Admittedly, the box crashes regularly, but I 
found it crashes even when  connected properly.

Regards.

Ian

On 4 Jun 2011, at 18:34, John Land wrote:

> You're absolutely right.  The sound Is squeezed and compressed by the sky 
> talker if you are getting your audio via tthe scart output.  The little 
> preamp is very low grade, and also adds audible hiss.  You can effect a 
> direct comparrison by listening to a channel with the talker, and pulling out 
> the power supply plug at the back of the unit.  The talker has been developed 
> and built using low-grade components, and is a bit of a "pig in a poke".
> John
> ----- Original Message ----- From: "Ian Robinson" <ian456@xxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Saturday, June 04, 2011 9:31 AM
> Subject: [access-uk] Re: Sky Talker
> 
> 
>> Hi,
>> 
>> The Sky Talker won't be of any help with setting programmes to record. All 
>> it will realy do is say which programme is being shown.
>> 
>> The box doesn't even say which recording  is selected for playback until it 
>> is actually playing.
>> 
>> I'm also convinced that the sound is slightly distorted by the Sky Talker. 
>> I've compared Radio 4 on Freeview and Sky, without Sky Talker connected, and 
>> they sound just the same.  With Sky Talker connected, the Sky signal sounds 
>> slightly tinny.  I've checked all the cables are firmly connected. Having 
>> said that, I've not heard of anyone else with the same issue so it may be a 
>> one off.
>> 
>> Lastly, the voice on the Sky Talker is dreadful.
>> 
>> given how many years it took to develop the sky Talker, it is hard to 
>> believe that this is the best that anyone could do.
>> 
>> If you want a reliable way to set recordings via sky, then you might like to 
>> take a look at the Remote Record feature available from sky's web site.
>> 
>> Alternatively, if you have either an IPhone or IPod Touch, then recordings 
>> can be set using an app called TV Plus.
>> 
>> Regards.
>> 
>> Ian
>> 
>> On 3 Jun 2011, at 21:25, Aedan O'Meara wrote:
>> 
>>> Hi all,
>>> New to this list.
>>> As a totally blind subscriber to Sky TV since their digital service started
>>> I would like to know what people think of the Sky Talker. I recently got the
>>> HD service with the Sky plus box for the family but would like to be able to
>>> record and replay items better than I can at the moment.
>>> Kind regards to all
>>> Aedan O'Meara.
>>> 
>>> 
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>> 
>> 
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> 
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> 

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: