[access-uk] Re: [Talks] N91 8GB Updated firmware and now it no longer TALKS
- From: "Ankers, Dave (UK)" <Dave.Ankers@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Thu, 27 Mar 2008 13:17:47 -0000
Jackie,
No I'm currently unable to install TALKS using the Nokia PC Suite, see
below.
Dave
Dave, you've updated the firmware, and re-installed TALKS right? If
you've done that and it isn't talking, I've no idea. Somebody help this
man please? (smile.)
Jackie
> Hi Jackie,
>
> No I bought the phone, and it has a Virgin pay as you go SIM in it.
>
> Cheers
>
> Dave
>
> Dave, is it a locked phone, because it occurs to me that if you've
> updated the firmware, it might not be happy if the network doesn't
> support it.
>
> Jackie
>
>> Hi All,
>>
>> I am cross Posting this as not having much luck and unable to use
>> phone apart from incoming calls at moment.
>> If anyone can help, please do
>>
>> Cheers
>>
>> Dave
>>
>> Chris,
>>
>> Thanks for that, however I have another problem at the moment. The
>> Nokia PC Suite, fails to fully interact with my N91 8GB. I am using
>> PC Suite version 6.85.14.1 and the application installer fails to
>> work
>
>> with my phone. At the top of the application installer, it says
>> connected to N91, but on the phone selector side, in the drop down,
>> it
>
>> says no compatible phone selected, and no other choice. That's when
>> it works, as most of the time when I click on the application, a
>> dialog box appears, announcing that the application has experienced a
>> problem and needs to close.
>>
>> It's very disappointing that the PC suite does not have a check for
>> latest update option in its help menu, however I believe I have the
>> latest version, unless someone can point me in the direction of a
>> later version. The one I am using is, 6.85.14.1
>>
>> Anyone else having same problem with PC Suite? Any help much
>> appreciated.
>>
>> Dave
>>
>> Hi, go to the Blind Sea website, click mobile corner, then click
>> Third
>
>> Edition Third Party Software. www.blindsea.com. Hope that helps.
>>
>> Ankers, Dave (UK) wrote:
>>> Hi All,
>>>
>>> Could someone please supply a link to the latest version of TALKS
>>> please.
>>>
>>> Dave
>>>
>>> Hi,
>>>
>>> Thanks, I've just tried finding the webpage I have on my home pc,
>>> for
>
>>> the latest version of TALKS, and have been unsuccessful. Could
>>> someone please forward the address please.
>>>
>>> One problem I experience quite often is Nokia PC Suite suffering
>>> from
>
>>> errors and having to close down, I use FS Magic, and wonder if this
>>> is causing the problem, does anyone else use FS Magic, and have the
>>> same problem.
>>>
>>> Dave
>>>
>>> just install it tot he phone via the PC suite, and then you go to
>>> restore license in the register menu of talks, when it is speaking
>>> as
>
>>> you are still using the same phone
>>>
>>> On 25 Mar 2008, at 08:57, Ankers, Dave (UK) wrote:
>>>
>>>> Hi all,
>>>>
>>>> I have used the accessible nokia updater and updated the firmware
>>>> on
>
>>>> my
>>>> N91 8GB, from 3.00.060, to 3.10.023. I had previously backed up my
>>>> phone, and on restarting, the phone failed to speak. My wife
>>>> checked
>>
>>>> the phone, and all my settings and contacts had disappeared. I
>>>> then
>
>>>> restored them back to the phone, but it still didn't speak.
>>>>
>>>> I presume TALKS has been scrubbed from the memory too. I have
>>>> downloaded to my PC, TALKS 3.5, from Steve Nuts, website, and
>>>> before
>
>>>> I
>>>
>>>> try installing it, would appreciate any advice on how to go about
>>>> this
>>>
>>>> and how to fully activate TALKS, as I presume it will start in
>>>> either
>>
>>>> ten minute mode or a thirty day trial period.
>>>>
>>>> All advice, much appreciated.
>>>>
>>>> Dave
>>>>
>>>> *******************************************************************
>>>> * This email and any attachments are confidential to the intended
>>>> recipient and may also be privileged. If you are not the intended
>>>> recipient please delete it from your system and notify the sender.
>>>> You should not copy it or use it for any purpose nor disclose or
>>>> distribute its contents to any other person.
>>>> *******************************************************************
>>>> *
>>>>
>>>> _______________________________________________
>>>> Talks mailing list
>>>> Talks@xxxxxxxxxxxxxx
>>>> http://lists.talksusers.com/mailman/listinfo/talks
>>>
>>> _______________________________________________
>>> Talks mailing list
>>> Talks@xxxxxxxxxxxxxx
>>> http://lists.talksusers.com/mailman/listinfo/talks
>>>
>>> _______________________________________________
>>> Talks mailing list
>>> Talks@xxxxxxxxxxxxxx
>>> http://lists.talksusers.com/mailman/listinfo/talks
>>>
>>> _______________________________________________
>>> Talks mailing list
>>> Talks@xxxxxxxxxxxxxx
>>> http://lists.talksusers.com/mailman/listinfo/talks
>>>
>> _______________________________________________
>> Talks mailing list
>> Talks@xxxxxxxxxxxxxx
>> http://lists.talksusers.com/mailman/listinfo/talks
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: