[access-uk] Re: [Talks] N91 8GB Updated firmware and now it no longer TALKS
- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sat, 29 Mar 2008 15:47:17 -0000
Hi Jackie,
If it was a locked phone, and the network didn't want you to update it, the
Nokia updater wouldn't present you with an update, simple as that. So that
is not the problem. But I am not sure what is.
All the best
Steve
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Jackie Cairns
Sent: Thursday 27 March 2008 10:28
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: [Talks] N91 8GB Updated firmware and now it no
longer TALKS
Dave, is it a locked phone, because it occurs to me that if you've updated
the firmware, it might not be happy if the network doesn't support it.
Jackie
Email: cairnsplace@xxxxxxx
Skype Name: Cairnsplace
----- Original Message -----
From: "Ankers, Dave (UK)" <Dave.Ankers@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, March 27, 2008 10:03 AM
Subject: [access-uk] Re: [Talks] N91 8GB Updated firmware and now it no
longer TALKS
> Hi All,
>
> I am cross Posting this as not having much luck and unable to use
> phone apart from incoming calls at moment.
> If anyone can help, please do
>
> Cheers
>
> Dave
>
> Chris,
>
> Thanks for that, however I have another problem at the moment. The
> Nokia PC Suite, fails to fully interact with my N91 8GB. I am using
> PC Suite version 6.85.14.1 and the application installer fails to work
> with my phone. At the top of the application installer, it says
> connected to N91, but on the phone selector side, in the drop down, it
> says no compatible phone selected, and no other choice. That's when
> it works, as most of the time when I click on the application, a
> dialog box appears, announcing that the application has experienced a
> problem and needs to close.
>
> It's very disappointing that the PC suite does not have a check for
> latest update option in its help menu, however I believe I have the
> latest version, unless someone can point me in the direction of a
> later version. The one I am using is, 6.85.14.1
>
> Anyone else having same problem with PC Suite? Any help much
> appreciated.
>
> Dave
>
> Hi, go to the Blind Sea website, click mobile corner, then click Third
> Edition Third Party Software. www.blindsea.com. Hope that helps.
>
> Ankers, Dave (UK) wrote:
>> Hi All,
>>
>> Could someone please supply a link to the latest version of TALKS
>> please.
>>
>> Dave
>>
>> Hi,
>>
>> Thanks, I've just tried finding the webpage I have on my home pc, for
>> the latest version of TALKS, and have been unsuccessful. Could
>> someone please forward the address please.
>>
>> One problem I experience quite often is Nokia PC Suite suffering from
>> errors and having to close down, I use FS Magic, and wonder if this
>> is causing the problem, does anyone else use FS Magic, and have the
>> same problem.
>>
>> Dave
>>
>> just install it tot he phone via the PC suite, and then you go to
>> restore license in the register menu of talks, when it is speaking as
>> you are still using the same phone
>>
>> On 25 Mar 2008, at 08:57, Ankers, Dave (UK) wrote:
>>
>>> Hi all,
>>>
>>> I have used the accessible nokia updater and updated the firmware on
>>> my
>>> N91 8GB, from 3.00.060, to 3.10.023. I had previously backed up my
>>> phone, and on restarting, the phone failed to speak. My wife
>>> checked
>
>>> the phone, and all my settings and contacts had disappeared. I then
>>> restored them back to the phone, but it still didn't speak.
>>>
>>> I presume TALKS has been scrubbed from the memory too. I have
>>> downloaded to my PC, TALKS 3.5, from Steve Nuts, website, and before
>>> I
>>
>>> try installing it, would appreciate any advice on how to go about
>>> this
>>
>>> and how to fully activate TALKS, as I presume it will start in
>>> either
>
>>> ten minute mode or a thirty day trial period.
>>>
>>> All advice, much appreciated.
>>>
>>> Dave
>>>
>>> ********************************************************************
>>> This email and any attachments are confidential to the intended
>>> recipient and may also be privileged. If you are not the intended
>>> recipient please delete it from your system and notify the sender.
>>> You should not copy it or use it for any purpose nor disclose or
>>> distribute its contents to any other person.
>>> ********************************************************************
>>>
>>> _______________________________________________
>>> Talks mailing list
>>> Talks@xxxxxxxxxxxxxx
>>> http://lists.talksusers.com/mailman/listinfo/talks
>>
>> _______________________________________________
>> Talks mailing list
>> Talks@xxxxxxxxxxxxxx
>> http://lists.talksusers.com/mailman/listinfo/talks
>>
>> _______________________________________________
>> Talks mailing list
>> Talks@xxxxxxxxxxxxxx
>> http://lists.talksusers.com/mailman/listinfo/talks
>>
>> _______________________________________________
>> Talks mailing list
>> Talks@xxxxxxxxxxxxxx
>> http://lists.talksusers.com/mailman/listinfo/talks
>>
> _______________________________________________
> Talks mailing list
> Talks@xxxxxxxxxxxxxx
> http://lists.talksusers.com/mailman/listinfo/talks
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: