[access-uk] Re: my desktop
- From: "Adrien Collins" <adriencollins22160@xxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Mon, 26 Jan 2015 21:13:05 +0100
Hi Mo
Just to give you an up-date, it looks as if most of the fans
in my desktop are not working, I have turned the pc off,
Paul is coming on Monday to fix my pc, I have a spare cpu
fan here plus he is bringing some fans, not sure what else
could be causing the problems. See below.
Sys Fan:0 RPM
CPU Fan:1245 RPM
Aux Fan:0 RPM
Aux1 Fan:0 RPM
Aux2 Fan:0 RPM
System:34C
CPU:90C
AUX:57C
SMIOVT4:34C
SMIOVT5:34C
SMIOVT6:34C
HD1:31C
HD0:36C
Core 0:29C
CPU:
Regards
Adrien
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Mobeen Iqbal
Sent: Sunday, January 25, 2015 8:21 PM
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: my desktop
Hi Adrien.
You could try HW Monitor. link is below. that seems to be
fine regarding
your CPU. if its just warm that's normal for any computer.
is it an AMD?
they always tend to get hotter...
http://www.cpuid.com/softwares/hwmonitor.html
cheers,
Mo.
On 25/01/2015 19:17, Adrien Collins wrote:
> Hi Mo
>
> I have copied this from my other pc via dropbox, the cpu
> temperature is fluctuating from 69 to 91 c, not sure which
> one you need. At present the top isn't too hot, just warm.
>
> Is there a better program than speedfan for monitoring the
> internal temperatures etc please.
>
> System:33C
> CPU:91C
> AUX:56C
> SMIOVT4:34C
> SMIOVT5:34C
> SMIOVT6:34C
> HD1:32C
> HD0:35C
> Core 0:34C
> CPU:
>
>
> Regards
>
> Adrien
>
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx
> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Mobeen Iqbal
> Sent: Sunday, January 25, 2015 7:48 PM
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: my desktop
>
> hi adrien.
>
> what's the current temperature? ideally it should be
between
> 30 degrees
> C and 50 degrees C. i've always disliked norton utilities,
> so they're
> probably sucking up resources and making your PC run
hotter.
> finally, is
> it an AMD by any chance?
>
> cheers,
>
> Mo.
>
> On 25/01/2015 17:35, Adrien Collins wrote:
>> Hi
>>
>> I have a few questions regarding my desktop. I had a new
>> power supply fitted to my desktop last year, I have just
>> noticed this morning, after running the desktop for a
> period
>> of time, perhaps a few hours, my desktop gets quite warm
> on
>> top, the power supply was replaced last year because the
> fan
>> in the old one seized up. I have checked the fans below
> the
>> power supply, I think there are two fans below, they seem
> to
>> be putting out cold air although this morning they were
>> putting out a lot of warm air, I have just checked the
> side,
>> there is air coming out of the side vent too. At first I
>> thought my cpu fan may be playing up but I am not quite
> sure
>> how I would know this. I had a few problems with my pc on
>> Thursday, it wouldn't shut off or shut down, I rolled it
>> back and this morning I installed norton utilities and
> found
>> several errors, in fact several hundred and fixed them. I
>> installed speed fan, the temperature of the cpu seems to
> be
>> a bit high, again I am not sure what the temperature
> should
>> be, I turned the pc off for the afternoon, let it cool
> right
>> down but I put it back on at 4 pm, after 2 hours it is
>> getting warm again. Is this normal? Should I be
concerned?
>> There is some air coming out of the power supply itself
> but
>> not a lot. What should my cpu temperature be? I assume
> that
>> if anything serious went wrong my pc would shut off to
>> protect itself? Also listening to it it sounds a bit
noisy
>> but it could be vibration on my desk. I have it sitting
on
> a
>> carpet tile. The desktop is one I had built a few years
> ago
>> in 2012, I use windows 7 pro on it. I may be worrying for
>> nothing but I pick up on noises and this doesn't quite
> sound
>> right to me.
>>
>> Regards
>>
>> Adrien
>>
>>
>>
>> ** To leave the list, click on the immediately-following
> link:-
>> **
>
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click
on
> the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
> ** To leave the list, click on the immediately-following
> link:-
> **
>
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on
> the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following
link:-
> **
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on
the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: