We're talking affordability not high production rates, "fast" is
subjective. talking about home use/prototyping small motors where you can
take a day or 2 to sinter metal one layer at a time.
Plus $20K is a lot easier to cough up than 6 figures, not a bad starting
point which most folks will never achieve. Remember I started at the bottom
self funded before those 6 figure started rolling in,got to start
somewhere,better than no where..
On Mon, Mar 30, 2020 at 2:58 PM Anthony Cesaroni <anthony@xxxxxxxxxxx>
wrote:
If you plan on building rocket motors at any practical level, you’ll need
more than 1KW and a good investment in ancillaries. Assuming you have an
appropriate, multi-axis base and envelope, plan on investing $50K~$100K to
get set-up with an entry level system that will require a fair amount of
development time on your part. Wire or powder wont matter. It’s at least a
6 figure investment. Good, fast, cheap…you can only pick two.
Anthony J. Cesaroni
President/CEO
Cesaroni Technology/Cesaroni Aerospace
http://www.cesaronitech.com/
(941) 360-3100 x101 Sarasota
(905) 887-2370 x222 Toronto
*From:* arocket-bounce@xxxxxxxxxxxxx <arocket-bounce@xxxxxxxxxxxxx> *On
Behalf Of *David McMillan
*Sent:* Monday, March 30, 2020 5:28 PM
*To:* arocket@xxxxxxxxxxxxx
*Subject:* [AR] Re: Hyperganic uses AI to design a 3D-printed rocket
engine
Just the laser, or does this include the positioner?
On 3/30/2020 3:27 PM, ken mason wrote:
The concept is awesome, the design, funky, why the thick walls and
'excessive' passages? Looks heavy even if aluminum, CRS even worse.
But when I saw 3D printing tech 10 years ago I wondered how long it would
be before the first bi-prop. Rocket Lab has certainly kicked ass!
I have a brand new 1KW fiber laser available, anyone?
On Mon, Mar 30, 2020 at 6:19 AM Joe Bowen <joe.b.bowen@xxxxxxxxx> wrote:
https://www.dezeen.com/2020/03/30/hyperganic-ai-rocket-engine-3d-printed/