Neat.
PHASE CHANGES 271
Table 19
Melting Points of Nitrates and Their Eutectics
On Sunday, July 12, 2020, Terry McCreary <tmccreary@xxxxxxxxxxxxxxx> wrote:
Also in Ellern's "Military and Civilian Pyrotechnics". It's online,somewhere.
38.
On 7/12/2020 4:29 AM, Hagen Hübner wrote:
More nitrate-eutectics can be found in Hardt, A.P.: "Pyrotechnics", p.
inHe even lists eutectics with urea. And I, too, would be very interested
temp...the results.
Hagen
Am .07.2020, 18:52 Uhr, schrieb Henry Spencer <hspencer@xxxxxxxxxxxxx>:
On Fri, 10 Jul 2020, James Fackert wrote:
If you could find a euctectic mix of oxidizers that melted at around
100' C, and asphalt or euctectic sugar or peg with similar melt
--No solid loading issues, no significant amount of mixed propellant
outside the motor, no voids issues.
If they weren't miscible, there'd be a strong tendency for the liquid to
separate into two layers. If they were miscible, even somewhat, or if
you
could do something like an emulsion to get them intimately mixed
temporarily regardless... then the liquid would almost certainly be an
explosive, and it might stay that way when solidified.
A report on the results would be interesting reading, provided the work
was done by someone else at least 50 miles away from me. :-)
The whole *point* of composite propellants is that the fuel and oxidizer
don't mix *too* intimately.
Henry
--
Diese E-Mail wurde von AVG auf Viren geprüft.
http://www.avg.com
Dr. Terry McCreary
Professor Emeritus
Murray State University
Murray KY 42071