Hi, I have the same issue with my pk. Sometimes it takes 2 or 3 times to pare the receiver with the unit and I have to do the same c 3 4 reset to get it to work. -----Original Message----- From: gps-talkusers-bounce@xxxxxxxxxxxxx [mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Robert Carter Sent: Tuesday, May 09, 2006 07:57 To: gps-talkusers@xxxxxxxxxxxxx Subject: [gps-talkusers] Re: Bluetooth connection procedure Hi, My pk sometimes behaves just as you have described. Robert Carter At 08:08 AM 5/9/2006, you wrote: >I have an interesting comment about this bluetooth business. >I use the pk for the gps primarily. Yesterday, my pk did a total >reset on me which put everything back to the factory defaults. >I went in this morning andturned the bluetooth on after turning on the Hollux. >Ok here is where things got interesting. It told me that bluetooth >was not on so I typed y. >Now it went on to tell me that the machine was unable to start bluetooth. >Ok not wanting to give up, I did a reset with no keys down except >the 2 control keys on the right hand side. >Ok here is what is so intriguing. When I again went into the >connectivity menu, I found to my delight that thebluetooth was on >and I was able to then pair with the hollux and we were off in a >jiffy because the receiver had already come into contact with the satellites. >Happy traveling, everybody! >Mary Ellen Earls >----- Original Message ----- From: "Scott Marshall" <Scott.Marshall@xxxxxxx> >To: <gps-talkusers@xxxxxxxxxxxxx> >Sent: Tuesday, May 09, 2006 4:49 AM >Subject: [gps-talkusers] Bluetooth connection procedure > > >Hello everyone: >I have read the message thread on Bluetooth connection problems and have >experienced the same myself, running version 3.5 on the MPower. Since >I'm a linear thinking kind of guy, here is what I understand the >recommended procedure to be: > >Once the holux has been paired, activesync is on, and Bluetooth is on: > >1. Turn the holux on. >2. Turn the Braille note on and wait for several seconds. >3. Run the GPS program. >4. A hard reset will destroy the pairing. >5. An ordinary reset may cause the Bluetooth function of the bN to be >turned off. > >If the above is not correct, please let me know. > >Thanks! > >Scott > > >