[gps-talkusers] Re: Bluetooth connection procedure
- From: "Rob Gentell" <rggeneral@xxxxxxxxxxxxx>
- To: <gps-talkusers@xxxxxxxxxxxxx>
- Date: Tue, 9 May 2006 20:19:34 -0700
Oh yes, I forgot to mention that pairing fails about 40% of the time at
least on the pk with Keysoft and Gps versions 7.0 and 3.5, respectively.
I don't recall the exact error message, but it is similar to "failed to
pair bluetooth device." Typing 0000 isn't that difficult so I've by now
ruled out user error. It seemed to have started with Keysoft 7.
-----Original Message-----
From: gps-talkusers-bounce@xxxxxxxxxxxxx
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of G B
Sent: Tuesday, May 09, 2006 8:05 AM
To: gps-talkusers@xxxxxxxxxxxxx
Subject: [gps-talkusers] Re: Bluetooth connection procedure
Hi,
I have the same issue with my pk. Sometimes it takes 2 or 3 times to
pare the receiver with the unit and I have to do the same c 3 4 reset to
get it to work.
-----Original Message-----
From: gps-talkusers-bounce@xxxxxxxxxxxxx
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of Robert Carter
Sent: Tuesday, May 09, 2006 07:57
To: gps-talkusers@xxxxxxxxxxxxx
Subject: [gps-talkusers] Re: Bluetooth connection procedure
Hi,
My pk sometimes behaves just as you have described.
Robert Carter
At 08:08 AM 5/9/2006, you wrote:
>I have an interesting comment about this bluetooth business.
>I use the pk for the gps primarily. Yesterday, my pk did a total
>reset on me which put everything back to the factory defaults.
>I went in this morning andturned the bluetooth on after turning on the
Hollux.
>Ok here is where things got interesting. It told me that bluetooth
>was not on so I typed y.
>Now it went on to tell me that the machine was unable to start
bluetooth.
>Ok not wanting to give up, I did a reset with no keys down except
>the 2 control keys on the right hand side.
>Ok here is what is so intriguing. When I again went into the
>connectivity menu, I found to my delight that thebluetooth was on
>and I was able to then pair with the hollux and we were off in a
>jiffy because the receiver had already come into contact with the
satellites.
>Happy traveling, everybody!
>Mary Ellen Earls
>----- Original Message ----- From: "Scott Marshall"
<Scott.Marshall@xxxxxxx>
>To: <gps-talkusers@xxxxxxxxxxxxx>
>Sent: Tuesday, May 09, 2006 4:49 AM
>Subject: [gps-talkusers] Bluetooth connection procedure
>
>
>Hello everyone:
>I have read the message thread on Bluetooth connection problems and
>have experienced the same myself, running version 3.5 on the MPower.
>Since I'm a linear thinking kind of guy, here is what I understand the
>recommended procedure to be:
>
>Once the holux has been paired, activesync is on, and Bluetooth is on:
>
>1. Turn the holux on.
>2. Turn the Braille note on and wait for several seconds.
>3. Run the GPS program.
>4. A hard reset will destroy the pairing.
>5. An ordinary reset may cause the Bluetooth function of the bN to be
>turned off.
>
>If the above is not correct, please let me know.
>
>Thanks!
>
>Scott
>
>
>
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.392 / Virus Database: 268.5.5/333 - Release Date: 5/5/2006
Other related posts: