[gps-talkusers] Re: Setting your virtual position to an unnamed location in a city
- From: "Baracco, Andrew W" <Andrew.Baracco@xxxxxx>
- To: <gps-talkusers@xxxxxxxxxxxxx>
- Date: Mon, 8 May 2006 09:07:06 -0700
I believe that if you choose a city without street info, that you will
be placed at the location of the city hall in that city.
Andy
-----Original Message-----
From: gps-talkusers-bounce@xxxxxxxxxxxxx
[mailto:gps-talkusers-bounce@xxxxxxxxxxxxx] On Behalf Of David
Sent: Saturday, May 06, 2006 9:48 AM
To: gps-talkusers@xxxxxxxxxxxxx
Subject: [gps-talkusers] Re: Setting your virtual position to an unnamed
location in a city
There is always more than one way to skin a cat, sorry cat lovers.
Once in California in virtual mode, you can press space and S and look
under cities for Oakland and make that your virtual location by pressing
V, that way you don't need to choose any streets. I don't know how GPS
decides where to place you in Oakland, or any other city for that
matter, but in this case it got you real close to your desired
destination. If you press space plus S again and search under the Buss
Railway category you will find Jack London Square, Bart station, 0.87
miles. . Make that your virtual location and you can then search for
restaurants or anything else you want.
Dave
taxation WITH representation isn't so hot, either!
----- Original Message -----
From: "Cheng Hock Kua" <adaptive@xxxxxxxxxxxxxx>
To: <gps-talkusers@xxxxxxxxxxxxx>
Sent: Friday, May 05, 2006 8:28 PM
Subject: [gps-talkusers] Re: Setting your virtual position to an unnamed
location in a city
> Hi Rob
>
> I took your challenge from Singapore and did this:
>
>
> Have the four maps for California loaded,
>
> Use the search address command with space-s
>
> Choose California
>
> Since you wanted Oakland
> choose Oakland
>
> Choose street name by entering
> cent
> since you were suggesting the center of the city
>
> and three street options came up
>
> Choose Center St.
>
> Since you did not have an address
> choose the default cross street at address 0
>
>
> At this point, choose v for virtual instead of destination.
>
> Next, set yourself in the virtual mode with the v command
>
> Now you are at the position on Center St.
>
> Use the space-f command to search within 0 miles to 10 miles or use
> any arbitrary distance.
>
> I chose 10 miles since I suspect I should be around the city center
> and want to look for the railway station.
>
> Choose the bus/rail category
>
> I then chose the search string by typing jack
>
> since you suggested Jack London in your e-mail.
>
> Jack London Square Bart Station, Alice Street, Oakland CA94607 was
> found within less than 2 miles away from my virtual position.
>
> At this point of interest prompt, I re-set my virtual position with
> space-v so that I would virtually be at the rail station
>
> and I was brought to the virtual position of the railway station.
>
>
> Now that I am "virtually at the Jack London Station", I can do another
> search for Restaurants with the space-f command. remember to start at
> the 0-miles to 1-mile radius so that you can find the nearest
> restaurant. 238 restaurants showed up!
>
>
> Enjoy yourself touring around Jack London Square Station before you
> arrive.
>
> Regards
> Cheng Hock
>
> ----- Original Message -----
> From: "Rob Gentell" <rggeneral@xxxxxxxxxxxxx>
> To: <gps-talkusers@xxxxxxxxxxxxx>
> Sent: Friday, May 05, 2006 2:09 PM
> Subject: [gps-talkusers] Setting your virtual position to an unnamed
> location in a city
>
>
>> Question: Is there a way of setting your virtual position by somehow
>> specifying the city without having to first set your virtual position
>> to a street name and a street number or cross street when you don't
>> know the name of a nearby street in order that you can locate a POI?
>> For example, perhaps you know ahead of time which train stop you'll
>> be getting off at (such as Jack London Square in Oakland CA or Grand
>> Central Station in New York), but you haven't got a clue what part of
>> town the station is in and you simply want to locate a nearby
>> restaurant ahead of time because you're starved. I'm looking for a
>> quick way to tell the GPS software that my virtual position is
>> somewhere in a particular city such as Oakland, CA so that I can then
>> perform a POI search for a railway/bus containing "Jack London".
>> Then, I can reset my virtual position to that railway stop and then
>> search out restaurants from that location. It would be convenient to
>> be able to skip the necessity to specify a street name and street
>> number or cross street when using the Set address command. Wouldn't
>> it be nice if after issuing the Set Address command and specifying a
>> state and city that one could then choose "Center of Town" as your
>> virtual position, and start exploring from there?
>>
>> Any ideas or comments are appreciated. Thanks.
>>
>>
>>
>
>
>
>
Other related posts: