[Ilugc] [Commercial] Linux box status with 2 line LCD
- From: mohan.tux@xxxxxxxxx (Mohan Sundaram)
- Date: Sat, 19 Nov 2011 17:48:31 +0530
On Sat, Nov 19, 2011 at 12:15 PM, Arun Venkataswamy <arun289 at gmail.com>
wrote:
On Sat, Nov 19, 2011 at 11:58 AM, 0 <0 at 0throot.com> wrote:
I do know of a few projects doing the same, but I want an India specific
project which can use locally sourcable components.
Can you provide us the links, if any ? It will help in getting a better
understanding on the project.
Old project based on LPT port, mostly non existent today:
http://www.mv.com/ipusers/cdwalker/lpt_driver.html
A mature project:
http://ssl.bulix.org/projects/lcd4linux/wiki/CoolStuff
Another one:
http://lcdproc.org/
For the hardware, look at CrystalFontz.com. I agree these are
expensive. I've integrated these for headless machines in 2001. These
used to come at $60-100 then.
I work with LCD displays now. We can get displays at a price points of
under $10 for 20x2 and 16x2 displays. Most of these controllers come
with SPI and UART interfaces. Look up
http://www.trulydisplays.com or
http:/www.everbouquet.co.tw.
In the US, there is a DIY electronics site called Sparkfun
http://www.sparkfun.com and in India, we should get some such from EFY
site powered by element14.
It would be a good thing to take cheap displays, make a USB to SPI
convertor board, a bay mountable fixture possibly with buttons.
Overall cost budget should be pegged at $12-13 which is achievable.
Typical components and prices are LDO $1.5 ( 5V to 3.3V), a
microcontroller with a USB device (PIC or MSP $1.5) and board would
cost approx $1 with passives.
We may need a library to be written to provide high level functions to
be able to write formatted text etc or interface this to lcdproc.
I've a hardware company that will work on this hardware for a small
payment, if someone can sponsor this. If someone can anchor the
software on the PC side, define the APIs to be implemented in
hardware, we could have a reasonable thing going.
-- Mohan Sundaram
Other related posts: