[jawsscripts] Re: String Segment Count
- From: "Geoff Chapman" <gch@xxxxxxxxxxxxxxxx>
- To: <jawsscripts@xxxxxxxxxxxxx>
- Date: Wed, 7 Jul 2010 16:43:44 +1000
yeah man sorry to have led you astray on this eh. my limited poor knowledge
might've cost you more energy and time chasing an obvious rainbow, and I'm
sorry about that. Sometimes I just offer things from what knowledge I
have, when it might be better to keep my mouth shut. But, I find sometimes,
if I am wrong, it often prompts somebody to pop up and correct, then we all
learn stuff I suppose. messy way to learn though eh. <groan.>
Sorry dude.
----- Original Message -----
From: "Mike" <mike_sharp@xxxxxxxxxxxxx>
To: <jawsscripts@xxxxxxxxxxxxx>
Sent: Tuesday, July 06, 2010 5:28 PM
Subject: [jawsscripts] Re: String Segment Count
> Geoff,
>
> Thanks for the reply. I am sure that I tried this but it did not seem to
> work but I will give it another go. The delimiters I need to check are a
> blank space and a hyphen.
>
> Regards,
>
> Mike
>
> --------------------------------------------------
> From: "Geoff Chapman" <gch@xxxxxxxxxxxxxxxx>
> Sent: Tuesday, July 06, 2010 5:12 AM
> To: <jawsscripts@xxxxxxxxxxxxx>
> Subject: [jawsscripts] Re: String Segment Count
>
>> Hi Mike.
>> well, I stand to be corrected, but my understanding was that you just
>> shoved
>> all of them next to each other inside quotation marks as the second param
>> of
>> the function?
>> i.e.
>>
>> StringSegmentCount (MyString, "| ")
>>
>>
>> the multiple delimiters in this case would be vertical bar followed by a
>> space, in sequence.
>> thus a vertical bar with no space following it, would not be considered
>> legal for the above code?
>>
>> BTW, you can also use, as can be very handy in some situations, and end
>> of
>> line character of "\n" as a delimiter as well.
>>
>> hth..
>> ----- Original Message -----
>> From: "Mike" <mike_sharp@xxxxxxxxxxxxx>
>> To: <jawsscripts@xxxxxxxxxxxxx>
>> Sent: Tuesday, July 06, 2010 9:10 AM
>> Subject: [jawsscripts] String Segment Count
>>
>>
>>> Hi All,
>>>
>>> I am a bit unsure on how to specify more the one delimiter in the
>>> stringsegmentcount function, can someone let me know how it is done?
>>>
>>> Regards,
>>>
>>> Mike
>>>
>>> __________�
>>>
>>> View the list's information and change your settings at
>>> http://www.freelists.org/list/jawsscripts
>>>
>>
>> __________�
>>
>> View the list's information and change your settings at
>> http://www.freelists.org/list/jawsscripts
>>
>>
> __________�
>
> View the list's information and change your settings at
> http://www.freelists.org/list/jawsscripts
>
__________�
View the list's information and change your settings at
http://www.freelists.org/list/jawsscripts
Other related posts: