[jawsscripts] Re: can't use CreateObjectEx when using HotSpotClicker
- From: "Jim Snowbarger" <snowman@xxxxxxxxxxxxxxxx>
- To: <jawsscripts@xxxxxxxxxxxxx>
- Date: Sat, 28 Mar 2015 15:20:02 -0500
Jason,
No, not exactly. It's a back burner deal at this point. However, taking a
look at it, the fix is in build 236, which you have running now, as I
understand. So, I'd like to solve the mystery of why you are still seeing this
issue.
To be clear, you try to call CreateObjectEx with three parameters, And, the
script manager says that it only accepts two?
I tried that here on 236, supplying 3 parameters, and it compiled just fine.
So, are you able to share your jss file, so I can try to get to the bottom of
this?
Thanks.
-----Original Message-----
From: jawsscripts-bounce@xxxxxxxxxxxxx
[mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Jason Fayre
Sent: Thursday, March 26, 2015 9:59 PM
To: jawsscripts@xxxxxxxxxxxxx
Subject: [jawsscripts] Re: can't use CreateObjectEx when using HotSpotClicker
Do you know when that version will be posted?
On 3/26/2015 10:52 PM, Jim Snowbarger wrote:
> Oh, ok, I just saw this.
> That fix must be in the version I have not yet posted.
>
> -----Original Message-----
> From: jawsscripts-bounce@xxxxxxxxxxxxx
> [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Jason Fayre
> Sent: Thursday, March 26, 2015 1:37 PM
> To: jawsscripts@xxxxxxxxxxxxx
> Subject: [jawsscripts] Re: can't use CreateObjectEx when using
> HotSpotClicker
>
> Hi,
> I actually got HSC installed. I just needed to tell it not to create a backup
> of my JAWS files.
> The version OF HSC I have installed is the current one, 236.
> Thanks!
>
>
>
> On 3/26/15, Jim Snowbarger <snowman@xxxxxxxxxxxxxxxx> wrote:
>> Jason,
>> I am the go to guy on this. I have a note form you that you were
>> unable to install the most recent version, and will work thatout with
>> you. I think there was an HSC code change recently, which removed a
>> patch that was needed to support old jaws versions, older than even I
>> need. So, once we get the new version installed, that
>> createObjectExe problem should go away.
>>
>>
>> -----Original Message-----
>> From: jawsscripts-bounce@xxxxxxxxxxxxx
>> [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Jason Fayre
>> Sent: Thursday, March 26, 2015 11:26 AM
>> To: jawsscripts
>> Subject: [jawsscripts] can't use CreateObjectEx when using
>> HotSpotClicker
>>
>> Hello,
>> I'm trying to do some work on an application that uses hotspots
>> created with HotspotClicker. Unfortunately, I'm unable to do anything
>> with CreateObjectEx to create a UIA object while hsc is loaded. If
>> the use hotspotclicker.jsb item is in my script, the compile fails
>> with an error stating:
>> Function CreateObjectEx requires two parameters not three.
>> If I remove the hsc line from the script, this problem goes away.
>> I looked at the HSC script, and it looks like it has a CreateObjectEx
>> function defined that appears to only take two parameters.
>> Has anyone come across this and how did you solve it?
>> Thanks!
>> __________
>>
>> View the list's information and change your settings at
>> http://www.freelists.org/list/jawsscripts
>>
>>
>>
>>
>> __________
>>
>> View the list's information and change your settings at
>> http://www.freelists.org/list/jawsscripts
>>
>>
> __________
>
> View the list's information and change your settings at
> http://www.freelists.org/list/jawsscripts
>
>
>
>
> __________
>
> View the list's information and change your settings at
> http://www.freelists.org/list/jawsscripts
>
__________
View the list's information and change your settings at
http://www.freelists.org/list/jawsscripts
__________�
View the list's information and change your settings at
http://www.freelists.org/list/jawsscripts
Other related posts: