>A: "linuxtrent"<linuxtrent@xxxxxxxxxxxxx> >Ogg: [Linuxtrent] Re: R: Re: Bluetooth non rilevato > >2014-12-27 22:10 GMT+01:00 massimo-pinamonti@xxxxxxxxx ><massimo-pinamonti@xxxxxxxxx>: >> >> # rfkill list >> 0: tpacpi_bluetooth_sw: Bluetooth >> Soft blocked: no >> Hard blocked: no > >Da qui sembra che il driver per il tuo chip sia thinkpad_acpi - >conferma se è caricato davvero (con "lsmod|grep thinkpad_acpi"). lsmod|grep thinkpad_acpi $ lsmod|grep thinkpad_acpi thinkpad_acpi 81069 1 nvram 14423 1 thinkpad_acpi snd 87611 22 snd_hda_codec_realtek,snd_hwdep,snd_timer, snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic, snd_hda_codec,snd_hda_intel,thinkpad_acpi,snd_seq_device > >A seconda di come è configurato il kernel che usi, questo driver può >esporre o meno un parametro per configurare l'emulazione software >dello switch di accensione del BT. Cerca il parametro >"dbg_bluetoothemul" nell'output di "/sbin/modinfo thinkpad_acpi": se >c'è, puoi provare la soluzione proposta qui: parm: dbg_wlswemul:Enables WLSW emulation (uint) parm: wlsw_state:Initial state of the emulated WLSW switch (bool) parm: dbg_bluetoothemul:Enables bluetooth switch emulation (uint) parm: bluetooth_state:Initial state of the emulated bluetooth switch (bool) > > http://askubuntu.com/questions/180744/how-to-enable-hard-blocked-bluetooth- in-thinkpad-edge-320 > Thanks, fatto tutto ma aggiungere questa riga "options thinkpad_acpi dbg_bluetoothemul=1 bluetooth_state=1" a thinkpad_acpi.conf e poi reboot e rfkill non cambia la situazione: tutto è sbloccato.. ma il "nessun adattatore trovato".. permane.. prossimo passo è provare a far partire con W$ e vedere se riesce a farlo partire, chissà, magari si sblocca qualcosa che può giovare anche in kubuntu. Grazie ancora -- Per iscriversi (o disiscriversi), basta spedire un messaggio con OGGETTO "subscribe" (o "unsubscribe") a mailto:linuxtrent-request@xxxxxxxxxxxxx