Posso cambiare i settaggi del mio controller? nell'utility delle impostazioni (c'ho messo mezz'ora a beccarla con ctrl+h) vedo sotto policies disk cache disable, ma sembrerebbe permettere anche enable, quindi la cache c'è(?) vi metto sotto le caratteristiche, potrò abilitarla per ottenere migliori valori di # pveperf FSYNCS/SECOND: il controller è RAID controller "RAID Ctrl SAS 6G 0/1" (D2607) ed ha queste caratteristiche Features ● 3.3 V / 12 V PCIe add-in card ● 8 lanes wide 5 Gbit/s PCIe host bus ● 8 SAS / SATA ports ● each SAS / SATA port supports SSP, SMP, STP, and SATA protocols ● support of the following STP features: – Addressing of SATA targets thru expander – Native Command Queuing (NCQ) ● support of the following SSP features: – Wide port functionality (2, 3 or 4 Phys from a single quad port) – Narrow port functionality (1 Phy) – Compatible with SATA target devices ● 2 Mini 4x SFF-8087 multilane connectors ● Drive spin-up sequencing control ● Hot plug drives ● 1.5 Gbit/s, 3.0 Gbit/s and 6.0 GB/s link rates for both SAS and SATA ● Supported RAID levels: RAID 0, 1, 1E, 10 ● 2 SGPIO interfaces for signaling of the 2 sets of quad SAS/SATA ports ● 16 MB Flash: Spansion S29GL128P ● 1 KB Bootstrap EEPROM ● RAID-key chip onboard ● 2-pin connector for additional LSI RAID-key (optional) PS: Francamente 500€ per un controller mi sembrano tanti. Questo > prezzo non lo raggiungo nemmeno a listino di hp iva compresa: > > http://h10010.www1.hp.com/wwpc/it/it/sm/WF06c/A1-329290-332469-3965957-3965957-3883890-3883935.html > Forse uno sconto si può pur avere e forse un controller simile fujitsu > costa pure meno. > -- > Per iscriversi (o disiscriversi), basta spedire un messaggio con OGGETTO > "subscribe" (o "unsubscribe") a mailto:linuxtrent-request@xxxxxxxxxxxxx > > >