The only thing I would add is that DVB-T is much more flexible and offers each broadcaster the ability to choose her/his own tradeoffs between signal robustness and data payload for their own circumstances, market, and needs. On the side of every DVB-T transmitter is a big knob that says 3.7 Mbps on one end and 23.7 Mbps on the other (all for 6 MHz US channels.) You can decide where the knob goes for your market, or even for which day part. The lower the payload, the more receivable the signal. At settings below 17 Mbps reception blows away even the finest "cold fusion" LG 5th generation prototype ATSC receiver, as demonstrated by it's ease of reception in mobile applications. DVB-T also allows a broadcaster to transmit to both fixed and mobile/portable receivers via hierarchical modulation (HM), DVB-H, or both. ATSC has attempted to include an HM mode of operation with the recent adoption of E-VSB, but as is the case for ATSC Cable and ATSC Satellite, it has remained a paper standard only, without any hardware support or broadcaster interest. ATSC is forever stuck at a single tradeoff, and relies on the kindness of strangers (receiver manufacturers) to provide the improvements in robustness. John Shutt ---------------------------------------------------------------------- You can UNSUBSCRIBE from the OpenDTV list in two ways: - Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.