Oops! Encountered a little problem which makes Yoshimi crash. So all went well
saving the instrument after lowering the D/W of the Reverb and then adding
Dynfilter and opening it's filter parameter window then midi learning the
C.freq knob with my expression pedal for the controlled Whawha effect.
Unfortunately when I chose the 64ft organ and accidentally touched that pedal
it made Yoshimi crash. Also after saving the changes if I close and restart
Yoshimi and select the instrument that midi learned knob is not saved anymore
and the pedal has no effect. Any idea why this is happening?
________________________________
De : yoshimi-bounce@xxxxxxxxxxxxx <yoshimi-bounce@xxxxxxxxxxxxx> de la part de
Gilles Blondin <blondingilles@xxxxxxxxxxx>
Envoyé : 8 février 2020 09:45
À : yoshimi@xxxxxxxxxxxxx <yoshimi@xxxxxxxxxxxxx>
Objet : [yoshimi] Re: Saving instrument settings
Ok I got it. Edit the instrument first then in the instrument window click save
and select the same instrument. And there I was looking for a save button in
the edit window, Duh...
________________________________
De : yoshimi-bounce@xxxxxxxxxxxxx <yoshimi-bounce@xxxxxxxxxxxxx> de la part de
Will Godfrey <willgodfrey@xxxxxxxxxxxxxxx>
Envoyé : 8 février 2020 06:02
À : yoshimi@xxxxxxxxxxxxx <yoshimi@xxxxxxxxxxxxx>
Objet : [yoshimi] Re: Saving instrument settings
On Thu, 6 Feb 2020 02:03:18 +0000
Gilles Blondin <blondingilles@xxxxxxxxxxx> wrote:
How do you save the settings when you edit an instrument? For example I use
one instance of Yoshimi and with my foot control I can select any instrument I
wish in the active bank list. I felt there was too much reverb on the Hammond
Organ so I select the Edit option then click the Effects button and lower the
Reverb D/W knob to the desired level. Unfortunately when I switch instrument
and later return to Hammond Organ the reverb level is back to where it was in
the beginning. How do I save the settings I need after editing them?
Again thanks for all you do.
Gilles