[access-uk] Re: 2 meg over wireless
- From: "Mark Threadgold" <m.j.threadgold@xxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 13 Apr 2005 19:25:25 +0100
Andrew,
Thanks for your thoughts but cable connection is not an option in my house.
I am just wondering if the 2 meg upgrade is going to be worth it. I could
drop to the 1 meg service and gain speed and pay less. If the wireless
becomes a bottleneck for the 2 meg then this would be a cheaper option than
upgrading to the g wi-fi without a doubt.
Mark Threadgold
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx]On Behalf
Of Andrew Ireland
Sent: 13 April 2005 19:20
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: 2 meg over wireless
Mark,
Wireless is fine for reading the mail in the sitting room on the
laptop, but personally you would be better connecting your machine on
a wire for serious use.
Cheers
Andrew
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx
> [mailto:access-uk@xxxxxxxxxxxxx]On Behalf
> Of Andrew Hodgson
> Sent: 13 April 2005 19:05
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: 2 meg over wireless
>
>
> Hi,
>
> The 802.11B gives you 11MBPS over the link, the 802.11G
> gives you 54MBPS
> over the link. I will leave it up to you to decide whether
> you need to
> fork out for the new hardware.
>
> Thanks.
> Andrew.
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx
> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
> Of Mark Threadgold
> Sent: 13 April 2005 18:42
> To: accessuk list
> Subject: [access-uk] 2 meg over wireless
>
> Hi all.
>
> I will shortly be upgraded to the NTL 2 Meg cable broadband.
>
> I currently have a Belkin 802.11b wireless router connected
> to the set
> top box and all works nicely.
>
> Will the 11 Mbps of the wireless network cope ok with the
> two and a half
> times speed increase in the broadband connection?
>
> Basic question I suppose is do I need to upgrade to an
> 802.11G setup to
> make use of the increase in broadband speed?
>
> Regards,
>
> Mark Threadgold
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts: